Memorial day carnage
#22
SORE MEMBER
Platinum Member
Join Date: Apr 2004
Location: 29°50'49.74"N 95° 5'17.55"W.......TEXAS
Posts: 6,989
Likes: 0
Received 1 Like
on
1 Post
I am sorry for your bad luck, I have seen that twice recently, one was a bad valve guide that wore out and let the valve get jammed broke off went across the intake and busted the opposite cylinder too, second was a water leak in the exhaust that took all the lube out of the valve guide and it stuck.
I am assuming you have bronze valve guides. Hope you figure the problem out quickly.
[ATTACH=CONFIG]541462[/ATTACH] Lake Houston Dam yesterday
I am assuming you have bronze valve guides. Hope you figure the problem out quickly.
[ATTACH=CONFIG]541462[/ATTACH] Lake Houston Dam yesterday
#23
Registered
#24
Fast Priorty II Nor-Tech
Platinum Member
This was at 6 am this morning in Tenn. hope she makes it back to Michigan on 5. Bummer we bent the axle.
#25
Registered
lost IAC on the ski boat. They don't idle with a crap without it!!! haha!
#26
Registered
Problem- helm seal leaking. Solution- replace helm seal. Time allotted- 1hr (ha!!!)
Result- fail due to cheap puller (not in photo, threw it across yard)
2nd attempt- 3 jaw puller, modified on bench grinder.
Result- fail. Aluminum hub seized to helm shaft, confirmed.
3rd attempt- angle grinder, cut off wheel, modified puller
Result- partial success. Destroyed hub, excellent reason to buy new wheel/hub. Helm seal replaced, no leak detected.
Result- fail due to cheap puller (not in photo, threw it across yard)
2nd attempt- 3 jaw puller, modified on bench grinder.
Result- fail. Aluminum hub seized to helm shaft, confirmed.
3rd attempt- angle grinder, cut off wheel, modified puller
Result- partial success. Destroyed hub, excellent reason to buy new wheel/hub. Helm seal replaced, no leak detected.
#27
Registered
#28
Registered
VIP Member
Join Date: Aug 2008
Location: Cleveland, Ohio
Posts: 292
Likes: 0
Received 0 Likes
on
0 Posts
I did it chasing the Coast Guard (really!!!)!! I was stuck at Shooters waiting for the bridge so they did a safety on me (didn't board - I was fully sober and had everything). We gave each other some good-natured ribbing waiting for the bridge. When the bridge went up, they edged to the front and I got stuck behind a searay that would have made a asscar teammate proud for its blocking job. CG hit the sticks at the mouth and took off at WOT, I finally got around the SR and took off after them. They made the turn into the station just as I caught up. Still some dialing to do (running way rich) and I probably need to take 2 teeth out of the blower pully (I'm thinking 7.5# is where I want to be with 30 degre advance and 8.5# static compression on 1471s, with intercooler (tripple water pump pushing a ton of water through dual -12 in and out on TBS intercoolers - flow rate is so high I get just 10# water pressure at 5500 rpm) and aluminum heads running 90 octane.
#29
SORE MEMBER
Platinum Member
Join Date: Apr 2004
Location: 29°50'49.74"N 95° 5'17.55"W.......TEXAS
Posts: 6,989
Likes: 0
Received 1 Like
on
1 Post
I did it chasing the Coast Guard (really!!!)!! I was stuck at Shooters waiting for the bridge so they did a safety on me (didn't board - I was fully sober and had everything). We gave each other some good-natured ribbing waiting for the bridge. When the bridge went up, they edged to the front and I got stuck behind a searay that would have made a asscar teammate proud for its blocking job. CG hit the sticks at the mouth and took off at WOT, I finally got around the SR and took off after them. They made the turn into the station just as I caught up. Still some dialing to do (running way rich) and I probably need to take 2 teeth out of the blower pully (I'm thinking 7.5# is where I want to be with 30 degre advance and 8.5# static compression on 1471s, with intercooler (tripple water pump pushing a ton of water through dual -12 in and out on TBS intercoolers - flow rate is so high I get just 10# water pressure at 5500 rpm) and aluminum heads running 90 octane.
#30
Registered
VIP Member
Join Date: Aug 2008
Location: Cleveland, Ohio
Posts: 292
Likes: 0
Received 0 Likes
on
0 Posts
Actually, he runs over 70 (it was the new one, not the outboards), had a 2-3 minute head start from the mouth of the river, and it was less than a mile, so no, I didn't catch him....