Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   General Boating Discussion (https://www.offshoreonly.com/forums/general-boating-discussion-51/)
-   -   Gauges - group by function or by engine? (https://www.offshoreonly.com/forums/general-boating-discussion/32887-gauges-group-function-engine.html)

dockrocker 09-12-2002 08:28 PM

Gauges - group by function or by engine?
 
As I'm going through my virtual project (virtual, as it exists only in my head... being boatless and broke is starting to affect my mind, I think...), I'm at the point where I'm building a new dash with modern gauges.

So, would you group the gauges by function, ie oil temp together, water temp together, etc, or would you group them by engine?

How do the manufacturers group them? My last boat was a single, and I'm hoping my next will be twins. Just wondering if there is a general consensus on how it should be done...

Audiofn 09-12-2002 08:39 PM

I like function. That way I can look at guages and instead of looking what they are and were they are pointed I can just look and see that they are pointed in the same direction and I am good.

Jon

rbtnt 09-12-2002 08:56 PM

by function

glassdave 09-12-2002 09:16 PM

i think i'll hafta agree with audio on this one because . . . well . . . . his opinion actually counts now that he has a working boat in the water :D . . .


hey as long as we're on the subject how do you feel about rotating the gauges so that when in operation the needls all point straight up. i have seen race cars set up like this so that all you need is a quick glance to know if anything is off . what do ya think :cool:

Audiofn 09-12-2002 09:18 PM

Glassdave I think we are all a little to vain to have our guages all over like that :D:D Porsche started that with the Tachs.

Jon

glassdave 09-12-2002 09:29 PM

:D :D :D . . i dunno . . i'm a little to vain to blow up my chit, i want good engine info . . . :D . . .


by the way, my opinion carries a little less weight as of 8:00 pm this evining . . .i sold the day cruiser, so i have no working boat. dont pick up the new boat for atleast a week or two. :cool: :rolleyes:

bajadude 09-12-2002 09:54 PM

my preference is by function

Tejas Raz 09-12-2002 09:59 PM

Without a doubt - By Function

RPM - RPM
Oil - Oil
Water - Water
etc.

Check out a military fighter's cockpit sometime. It's designed for a fast scan in a life or death environment! Think about it.

dockrocker 09-12-2002 10:43 PM

That's kind of what I was thinking - you need to be able to grab a quick look-see as you're bouncing across the waves. Is it pretty much SOP for the builders to group them by function? I'll have to take a closer look at the fall boat show next week...

cuda 09-12-2002 11:23 PM

Mine are grouped by engine. I know sometimes I'll grab a quick glance at them and think the oil pressure is the temp gauge and my heart is in my throat for a second. I agree, by function.


All times are GMT -5. The time now is 11:39 AM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.