Offshoreonly.com - Garmin 7612 and Smartcraft

Page 2 of 2

Show 40 post(s) from this thread on one page

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- General Boating Discussion (https://www.offshoreonly.com/forums/general-boating-discussion-51/)

- - Garmin 7612 and Smartcraft (https://www.offshoreonly.com/forums/general-boating-discussion/329977-garmin-7612-smartcraft.html)

BUP	08-22-2015 03:55 PM

and I am guessing you need this not sure just going off the top of my head here.

http://www.amazon.com/Mercury-Smartc.../dp/B006M2R0GC

Double Rigged

08-22-2015 06:44 PM

Quote:

Originally Posted by BUP (Post 4346067)

So you installed this ?

https://www.yumpu.com/en/document/vi...0-gateway-mibo

Yes if your engines are smartcraft. Make sure it is a multiengine gateway. I think they only sell one now that does both but you used to have to specify.

erik1976

08-23-2015 11:39 AM

Also not sure if you have a merc race view or vessel view you shouldn't need to buy a gateway to connect to garmin, ron am I right in this?

Double Rigged

08-23-2015 03:10 PM

The only ones that do not need gateways are the new vessel view 4.5 and VV 7.
You do need one with the older vessel views and race views.

Ace531531

05-30-2017 07:29 AM

I want to connect Vesselview 4.0.0.5 to Garmin NEMA 2000 network. I think i need a Mercury Mercruiser 84-8M0065208 Gateway module. Does anyone know what else I will need (Cables, connectors etc.)?

All times are GMT -5. The time now is 03:11 AM.

Page 2 of 2

Show 40 post(s) from this thread on one page