Engine Hoist
09-20-2002, 02:53 PM
#21
Registered
Join Date: Feb 2002
Location: Orlando
Posts: 1,956
Likes: 0
Received 0 Likes
on
0 Posts
and of course it comes with engineered drawings
i picked a 3000lb generator out of my truck with it...the channel was bowing a little ....i drilled holes in the inner 2" pipe to allow for adjustment up or down...just pull the 1/2 " pins and drop it down....or raise it up...at rest i can roll it in the shop or it can be taken apart
sorry for the sloppy drawing,,,,I'm no artist
i picked a 3000lb generator out of my truck with it...the channel was bowing a little ....i drilled holes in the inner 2" pipe to allow for adjustment up or down...just pull the 1/2 " pins and drop it down....or raise it up...at rest i can roll it in the shop or it can be taken apart sorry for the sloppy drawing,,,,I'm no artist
Thread
Thread Starter
Forum
Replies
Last Post
JGB
General Q & A
40
02-16-2005 10:26 AM
