Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   General Boating Discussion (https://www.offshoreonly.com/forums/general-boating-discussion-51/)
-   -   Building a Sleeper (https://www.offshoreonly.com/forums/general-boating-discussion/332318-building-sleeper.html)

Papasmurf 03-15-2016 01:06 PM

[ATTACH=CONFIG]552409[/ATTACH]

Double Ds and Hardin Flame Arrestor......................Life is GOOD!

Papasmurf 03-16-2016 03:46 PM

1 Attachment(s)
[ATTACH=CONFIG]552467[/ATTACH]


If you happen to be in NC, and on Lake Norman this summer, and are coming up behind a boat that looks like this, don't blow past me like a dickhead.............you just might get your feelings hurt!

iliveonanisland 03-16-2016 04:30 PM


Originally Posted by Papasmurf (Post 4415096)
Thought i would post up some cost so far

540 Merlin EFI Custom Built Should come in around $23,000
Used set of Keith Eckiard Headers $ 2,000
Used Bravo 1 Lower Housing w/1.25" prop Shaft $ 750
Rebuilding Lower with XR Gears and Upper Shaft $ 2,100
Hardin Drive Shower $ 130

Still to come Custom Dry/Wet Exhaust Tails $1,800 ?
Engine Install $1,500 ?

Longer Trim Tabs next summer $2,000
External Hyd Steering next summer $3,000

What will I have:

A Fully warranted 700HP 89Octane Engine that can continue on with me in any boat I may have in the future
A Fully warranted outdrive by my local guy, who is dying to see what we end up with that can also move with me one day

Piece of mind in knowing I have a well know Builder invested in the success of my engine

My local repair shop that is working closely with my builder and is excited as I am about the project

Money well spent!

Buying used exhaust is like buying used condoms.... just dont

Papasmurf 03-16-2016 07:01 PM


Originally Posted by iliveonanisland (Post 4416688)
Buying used exhaust is like buying used condoms.... just dont

Normally I would totally agree with you sir. But since these where known headers from my engine builder, I took a chance

BBCLiberator 03-16-2016 10:35 PM


Originally Posted by Papasmurf (Post 4416757)
Normally I would totally agree with you sir. But since these where known headers from my engine builder, I took a chance

I know he is talking headers, and that's different, I'd buy SM Manifolds all day, especially fresh water. I'm married and snipped, no condoms for this guy :)

Papasmurf 03-17-2016 12:46 PM


Originally Posted by BBCLiberator (Post 4416879)
I know he is talking headers, and that's different, I'd buy SM Manifolds all day, especially fresh water. I'm married and snipped, no condoms for this guy :)

Me too brother. Have been for years. Only thing that gets between me and my woman is a little lube called **** Water. It's great. Cuts down on the smoke and flames when things get really HOT !

distantthunder 03-17-2016 12:58 PM


Originally Posted by Papasmurf (Post 4417088)
Me too brother. Have been for years. Only thing that gets between me and my woman is a little lube called **** Water. It's great. Cuts down on the smoke and flames when things get really HOT !

This is too funny, especially when it pops up in an email while I'm at work. HAHA!

SB 03-17-2016 01:09 PM

Very good choice in Exhaust !!!!! Will make it an over achiever.

36Tango 03-17-2016 01:13 PM


Originally Posted by Papasmurf (Post 4415096)
Thought i would post up some cost so far

540 Merlin EFI Custom Built Should come in around $23,000
Used set of Keith Eckiard Headers $ 2,000
Used Bravo 1 Lower Housing w/1.25" prop Shaft $ 750
Rebuilding Lower with XR Gears and Upper Shaft $ 2,100
Hardin Drive Shower $ 130

Still to come Custom Dry/Wet Exhaust Tails $1,800 ?
Engine Install $1,500 ?

Longer Trim Tabs next summer $2,000
External Hyd Steering next summer $3,000

What will I have:

A Fully warranted 700HP 89Octane Engine that can continue on with me in any boat I may have in the future
A Fully warranted outdrive by my local guy, who is dying to see what we end up with that can also move with me one day

Piece of mind in knowing I have a well know Builder invested in the success of my engine

My local repair shop that is working closely with my builder and is excited as I am about the project

Money well spent!

I don't know much about anything, but it sure seems like setting this boat up without hydraulic steering from the start would be a big mistake.

Papasmurf 03-17-2016 07:33 PM


Originally Posted by distantthunder (Post 4417098)
This is too funny, especially when it pops up in an email while I'm at work. HAHA!

Glad I could brighten your day sir!


All times are GMT -5. The time now is 11:49 AM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.