Sorry i cant help, but sure looks like a nice and clean boat!
Behind my head, im still struggling with the idea of redoing an old cat or someday buy lets says a low budget more actual cat, like a motion, spectre or anything else like that... I always come back thinking those old cat were not, to my knowledge, slower or less quality built than the more actual cat... Don,t know if im wrong or not, but im still looking for the right project cat, not too far from home!

Keep us updated with your project, interested in following your tread! Not too late to give yourself a nice chrismas gift!!!

The interior looks like a vicious cat title says aero tech shadow cat but can't really find any info on it I guess some one had the molds for a little bit, it is still owned by the church, by the research I have done it has a little bit of American offshore hull and deck and with vicious interior and dash thanks for all your help

wasnt AeroTech a Jim Klem company?

No, that was Aero Marine, they are referring to Aerotek.

the chris cat & shadow molds went to lots of builders
in that era
the chris cat hull has a wider flat pad/sponsom on bottom at transom than the shadow cat hull did
which made hull a tad wider than shadow
chris cats were designed for BBs
and shadow for SBs/O/Bs
the vicious in the ebay add u can see the wide pad on bottom sponsom
so that pad width will tell u which hull it is
good boats for their time,,,,,thick and heavy
good lookin boat ,,,with surface drives will turn some heads
not as fast as hulls today but handles ruff good for the size

Step away from the cosmetics and look at the transom. What's the MIC code in HIN? Here's some of the builders mentioned.

Shadow Cat: GSC
Vicious: VPB
American Offshore: GSW
Chriscraft: CCB, CCH, CCT, CCU, CIT, OFV, UNF
AERO-TEK POWERBOATS LLC: AEO
AET: AERO CAT LLC
AOW: AERO-TEK HIGH PERFORMANCE INC (OOB)
AJU: AERO MARINE

First part of the vin is knk it was stamped by division of watercraft Ohio and the vin is 12 digits long is there any other place on the hull the vin would be stamped

Found it on hin decoder.com
The boat is k and k industries owner is gene Kylm anyone anything about this company or guy I would love to get in contact with him thanks

MIC: KNK Status: Inactive
Company: K & K INDUSTRIES Company Official: KLYM, GENE
Parent Company: NULL Parent MIC: NUL
Address: 16834 CHESTERFIELD City: E DETROIT
State: MI Zip: 48021
Country: NULL Phone: 3137730035
Fax: NULL In Business: 9/9/1985
Out of Business: 9/22/1988 Date Modified: 9/22/1988
Type: Outboards, Open Motorboats, Jon Boats
Inboard/Outboard, Sterndrive, Inboard/Outdrive
Addtional Address: