Recommend someone for drive service
 

I'm in Buffalo and willing to travel to Michigan, Ohio, PA, Vt, NH, etc for someone who knows bravos (Bravo 1) that can tear down, inspect, and rebuild mine.

Who are the go to shops for this?

TIA,
Ryan

try performance marine Bolton landing lake George new York Jason or johny saris

Dick Tryce AKA "mr, gadgets" on the OSO forum.

Victory marine,

http://www.victorymarine.com/service.html

You can box it up and ship. I have (3) Bravo XZ/IMCO drives built by these guys, and they have been trouble free and bullet proof. And the boats they are on are 98-112 mph boats too. Little Bill is a stand-up guy!
In fact, I'm getting ready to order some -3 IMCO SC from Victory for the Spectre.....

It's a 2 hr drive to DoubleR Performance north of Toronto. They do lots of cross border business and the weak CAN dollar gets you a nice discount. http://www.doublerperformance.com/ Phone 705-487-7575 Ask for Clint in service or Peter can get you hooked up with someone to help.

Bob

George at All American Drive Service in MI.

Had both mine done by Mr Gadgets on here sent then to him from the uk . Great service

ditto! i think he is running a 1000 ++ pro charged hp's thru his bravo or xr?

todd

Bravos
 

Simmons marine best bravo guy in country

We'd be happy to help.
www.perfmar.com
www.facebook.com/teamsaris
Mercury Certified, Tons of Experience, have done work for a lot of people in your area
518-644-3080
[email protected]

Ron at jrmarine in Ohio may be worth a shout.

How can that be? As I read these threads a Bravo drive can't handle as much as 650 HP without exploding, what gives here?

Performance Marine for sure!

I was referred to Mr Gadgets aka Dick Tryce & after spending nearly an hour on the phone with him decided I didn't need to look any further. The fact that he's not far from me was a bonus. I'm sure there are other guys that are good but I spent my $$ with Mr Gadgets & will spend it again with him. We have a 900 HP BoostPower compound blower motor in front of an XR in a heavy 24' deep V that is NOT a trailer queen.

George at AADS.

He runs a SCX.

Performance Marine for sure

No Brainer Saris Racing in Bolton Landing.!!!

Morning i have my drive guy here on Long island NY if interested. Very talented does all and any drives. His name is Skip
Also very personal you get 1 on 1 service

You have a Mercruiser authorized shop that specializes in all Mercruiser drives right in your backyard - Excel Marine on Grand Island. They do a great job and are very thorough. They have worked on many of my drives as well as a lot of our club (WNYOPA) member's boats. They are very experienced with Bravo's and I would definitely recommend them. Check their website out (excelmarineparts.com). They are located at 1854 Whitehaven Rd, Grand Island (716) 773-9530....

Ok thanks, that clears it up. I was beginning to think someone came up with a magic fix for the merc XR lol.

I have hear so many good things about AADS, that I will bring them my drive and hope my gut is right.

I have done business with George "AADS" for the past 5 years. All of my customer work goes to them as well as my built XR's. Very knowledgeable and great customer service! Highly recommend!

Excell Marine. You will be glad you went there. I can't say enough about how they exceed all my expectations. I have had them rebuild both my black hawk drives, tuned my motor, adjusted timing, so many other things for me. Each and every time they continue to impress me.