Offshoreonly.com - Need Some Dyno test results for 496

Page 7 of 7

Show 40 post(s) from this thread on one page

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- General Boating Discussion (https://www.offshoreonly.com/forums/general-boating-discussion-51/)

- - Need Some Dyno test results for 496 (https://www.offshoreonly.com/forums/general-boating-discussion/334972-need-some-dyno-test-results-496-a.html)

Knot 4 Me

10-24-2016 07:13 AM

1 Attachment(s)

Only thing I got from Retter...

Keith Atlanta

10-24-2016 10:00 AM

Quote:

Originally Posted by Knot 4 Me (Post 4493985)

Only thing I got from Retter...

Was that the Mag or HO?
What exhaust?

Knot 4 Me

10-24-2016 10:48 AM

Quote:

Originally Posted by Keith Atlanta (Post 4494024)

Was that the Mag or HO?
What exhaust?

MAG only. Bent a rod so bored .030 over, SRP forged pistons, Scat H-beam rods, otherwise stock with the heads cleaned up and a valve job. I contemplated turning it into an HO but it is out of a runabout that I was planning to sell so it didn't make sense financially. Stock exhaust with turbulators still installed. This was dyno'd wet with the stock exhaust and all accessories installed.

All times are GMT -5. The time now is 09:55 AM.

Page 7 of 7

« First

Show 40 post(s) from this thread on one page