baronmarine

any chance one of you outerlimits guy's can get me the dim's on the aluminum mounting bracket's & maybe a couple of pics of the mounting portion of the removable insert?

thanks
todd

Nauti Kitty

Need the same thing Todd
Hope someone responds

TomFTM

iTrader: (3)

when we did mine , I got the aluminum that mounts to the outside of the bolster from outerlimits . The piece that mounts to the removeable seat we made out of 3/4 starboard. (this piece is just a u that slides over the aluminum piece). I will post a picture of it later today.

baronmarine

that would be great.

thanks
todd

TomFTM

iTrader: (3)

here u go. [ATTACH=CONFIG]551905[/ATTACH][ATTACH=CONFIG]551906[/ATTACH]

baronmarine

hi tom

quick question. the bracket looks to be about 2 - 2 1/2" wide by maybe 1" thick?

thanks much
todd

TomFTM

iTrader: (3)

Todd, I will get u dimensions in the am .

TomFTM

iTrader: (3)

Todd, its 2 1/2 wide by 17 length 3/4 thick. let me know if u need anything else. Tom

baronmarine

thanks so much for your time tom. keep you posted how it turns out. hope to get started in the next week.

todd