Start to Finish: Building Our 50' Skater
#1553
Registered
Jordanelle reservoir up in the mountains by Salt Lake City, Utah
here is a shorter condensed version of the video
here is a shorter condensed version of the video
Last edited by BigSilverCat; 01-07-2018 at 03:42 PM.
#1554
Tyson you look like you have spent too much time in Michigan. You are out there testing in a Skater T shirt while everyone else in the boat is bundled up with jackets and hats. Do you have the seat heater on?lol
Thanks for sharing your build.
Thanks for sharing your build.
#1556
Registered
It was definitely a different view then I have ever seen at 90 mph.
Last edited by BigSilverCat; 01-07-2018 at 11:41 PM.
#1557
Registered
Join Date: Aug 2012
Location: Collierville, TN and Pickwick Lake
Posts: 2,291
Received 394 Likes
on
164 Posts
That starboard engine didn't look happy from the get go, it seemed to be steaming heavily at the start compared to the port.
Whats making to turbos let go? they should be the simplest part of the project if matched to the engine correctly and not over-speeding.
Here's one of my turbos off my motors what size inducer and exducer you running?
Whats making to turbos let go? they should be the simplest part of the project if matched to the engine correctly and not over-speeding.
Here's one of my turbos off my motors what size inducer and exducer you running?
#1559
Registered
The last time I was testing in Michigan it was 29 degrees out and sleeting/raining on us, and we had a 45 min idle back to the dock after we already had a 100 MPH wind chill while we were wet. It was pretty cold. Out here even tho we were in the mountains it was mid 30's degrees nice sunny day with no humidity, it really was not cold at all, with me in the boat I had a winter coat, insulated coveralls, scarf, face mask, several hats, gloves and did not need any of them.
It was definitely a different view then I have ever seen at 90 mph.
It was definitely a different view then I have ever seen at 90 mph.
#1560
Registered
the best time of year to go around the world is spring time so we won't make it this year. Hopefully this spring we can start doing some shorter endurance runs and be ready next year.