|
600SCI Reversion?
I have read the cam is not particularly aggressive. Would it be better to put dry tails to limit the possibility of reversion? I would like some water at the end to make it appear legal at a minimum. I have heard differing opinions and don't want to take a chance on a new engine. Anything to worry about with wet exhaust?
Thanks for any ideas |
Great question Greg, I hope you get some responses.
|
Originally Posted by Pantera572
(Post 4416401)
I have read the cam is not particularly aggressive. Would it be better to put dry tails to limit the possibility of reversion? I would like some water at the end to make it appear legal at a minimum. I have heard differing opinions and don't want to take a chance on a new engine. Anything to worry about with wet exhaust?
Thanks for any ideas |
Originally Posted by HyFive578
(Post 4416465)
I addressed my reversion issues with my 525's by having full length tails made. They are dry to just about an inch before the end and dump the water right at the very end of the tailpipe.
|
CMI Tails the way to go.
|
My engines aren't 600's , I have the straight back CMI's with this kind of tail, through the transom about 5 in.
|
Thanks guys!
|
Originally Posted by Pantera572
(Post 4416492)
Exactly what I am looking for. Did CMI make them for you? how long is full length out of the transom? Thanks for you help!
|
Originally Posted by HyFive578
(Post 4417329)
Yes, CMI made them for me. They stick about 2" outside the transom. Call David Rank at CMI and tell him you want the same tails as Neil H. with the 47 Fountain.
|
| All times are GMT -5. The time now is 04:21 AM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.