any used/retired 30' svl boat hulls for sale
#31
Registered
Here is a list of all known SVL's in the USA and where you can find them
Typhoon: A Class (OPA) Extreme
Pirate: A Class(OPA) Phantom
Octane: A Class(OPA) Phantom
Tug It: A Class(OPA) Phantom
WeHaulBoats.com: A Class(OPA, Sarasota Invitational) Phantom
Former Steady Pumpin: A Class(OPA) Boat sold to NJ team within the past month Phantom
LSB: SVL (OPA, SBI, Sarasota Invitational) Extreme
Boatfloater: SVL(SBI, OPA, Sarasota Invitational) Extreme
Punisher: SVL (OPA) Phantom
Red Hot: SVL (SBI) Fountain
Absolutely Not: SVL (SBI) Fountain
Snowy Mountain: SVL (SBI, LOTO Run What Ya Brung) Outerlimits
Bandit Hull #1 SVL (SBI) Bandit
Bandit Hull #2 SVL (under construction, says SBI) Bandit
Sunprint: SVL (SBI) Extreme
Activator 30 Hull #1: SVL (says SBI) Activator/Rage
Activator 30 Hull #2: SVL (under construction,says SBI... Poker Running and Fun Runs) Activator/Rage
TnT Racing: SVL (under construction, says SBI) Activator
Laveycraft: SVL (in Texas with new owners, Fun Running and Shootouts) Laveycraft
Former No Vacancy: A Class (SBI Bracket, Sarasota Invitational) Boat sold, dont have a clue if it will be back on the race course Phantom
Phantom 9: SVL (SBI, Sarasota Invitational) Phantom
Mr Technology: SVL (OPA Bracket, Sarasota Invitational, SBI) Phantom
Turn Key Marine out of Buford, Georgia(Screaming Nuts, Time Bandit): A Class (Free Agent) Phantom
R&S Offshore Bad Boy 32': SVL(says SBI) Bad Boy
Original 30' Phantom SVL, former P4 boat out of Phantom shop Phantom
Boats highlighted are probably your best options to maybe look into to see if the owner is willing to sell.. Snowny Mountain , I do know was in OSO classified a while back
Typhoon: A Class (OPA) Extreme
Pirate: A Class(OPA) Phantom
Octane: A Class(OPA) Phantom
Tug It: A Class(OPA) Phantom
WeHaulBoats.com: A Class(OPA, Sarasota Invitational) Phantom
Former Steady Pumpin: A Class(OPA) Boat sold to NJ team within the past month Phantom
LSB: SVL (OPA, SBI, Sarasota Invitational) Extreme
Boatfloater: SVL(SBI, OPA, Sarasota Invitational) Extreme
Punisher: SVL (OPA) Phantom
Red Hot: SVL (SBI) Fountain
Absolutely Not: SVL (SBI) Fountain
Snowy Mountain: SVL (SBI, LOTO Run What Ya Brung) Outerlimits
Bandit Hull #1 SVL (SBI) Bandit
Bandit Hull #2 SVL (under construction, says SBI) Bandit
Sunprint: SVL (SBI) Extreme
Activator 30 Hull #1: SVL (says SBI) Activator/Rage
Activator 30 Hull #2: SVL (under construction,says SBI... Poker Running and Fun Runs) Activator/Rage
TnT Racing: SVL (under construction, says SBI) Activator
Laveycraft: SVL (in Texas with new owners, Fun Running and Shootouts) Laveycraft
Former No Vacancy: A Class (SBI Bracket, Sarasota Invitational) Boat sold, dont have a clue if it will be back on the race course Phantom
Phantom 9: SVL (SBI, Sarasota Invitational) Phantom
Mr Technology: SVL (OPA Bracket, Sarasota Invitational, SBI) Phantom
Turn Key Marine out of Buford, Georgia(Screaming Nuts, Time Bandit): A Class (Free Agent) Phantom
R&S Offshore Bad Boy 32': SVL(says SBI) Bad Boy
Original 30' Phantom SVL, former P4 boat out of Phantom shop Phantom
Boats highlighted are probably your best options to maybe look into to see if the owner is willing to sell.. Snowny Mountain , I do know was in OSO classified a while back
#32
Registered
iTrader: (1)
Great list to have. There is also a yellow one in Maryland I believe that raced OPA a couple times. John I know there are several others in Trinida I believe. Now that list may be more difficult to put together but Trent may have a handle on that as well. Steves old (Extreem) and Firewater (Extreem) are the ones I know about. What ever happened to the one that got raffled off by John Haggen?
#33
Registered
iTrader: (1)
Heres a link to a pic of the yellow one, looks like a Phantom...
http://lucidideefastboats.com/p47242...03a0#h121303a0
http://lucidideefastboats.com/p47242...03a0#h121303a0
#34
Registered
Thread Starter
lots of good info here tks
figure 1 will pop up eventually hull only
I blame will for building the phantom too dam good
as I was hoping to find a broke hull /damaged in some manner
for my starting point
does any1 know about this boat
not a svl but is 30' with 2 steps that's been raced for yrs
capsule would have to go and start over as the small windows with blind spots has an egg look
he has no hull weight to give me or even a complete # to deduct from,,,,so imagine heavier than I want to start with
said its a late 90s larry smith scarab,,,,,,,
[ATTACH=CONFIG]556907[/ATTACH]
figure 1 will pop up eventually hull only
I blame will for building the phantom too dam good
as I was hoping to find a broke hull /damaged in some manner
for my starting point
does any1 know about this boat
not a svl but is 30' with 2 steps that's been raced for yrs
capsule would have to go and start over as the small windows with blind spots has an egg look
he has no hull weight to give me or even a complete # to deduct from,,,,so imagine heavier than I want to start with
said its a late 90s larry smith scarab,,,,,,,
[ATTACH=CONFIG]556907[/ATTACH]
Last edited by johnmiffco; 07-01-2016 at 06:20 PM.
#35
Registered
iTrader: (1)
Heres a link to photo when it raced.... http://lucidideefastboats.com/p68700...ab8a#h37efab8a
The deck is new since it has been raced and was originally brought out as the "Pitman Photo" A Class boat.. When it ran in P4 it ran a 750 Mercury Supercat motor with I think(dont hold me to the drive) a #5 or speedmaster of some sort... was very very heavy and really lacked acceleration against the newer F1's with 500 efi's Its been for sale for a while.. As you said, it never competed in the SVL class, obviously due to the 750
The deck is new since it has been raced and was originally brought out as the "Pitman Photo" A Class boat.. When it ran in P4 it ran a 750 Mercury Supercat motor with I think(dont hold me to the drive) a #5 or speedmaster of some sort... was very very heavy and really lacked acceleration against the newer F1's with 500 efi's Its been for sale for a while.. As you said, it never competed in the SVL class, obviously due to the 750
#36
Registered
Thread Starter
yea that's what I thought was heavy hull
as wouldn't answer simple ?s
ill be getting back with will as he wanted to get with me on some stuff
so we may work out something as I really like the 36 capsule look,,,,
and fit it to a 30 with 4 bucket seats
wanting to stay in a weight spot for what im doing
to keep my excelleration and speed I have now
and with longer/wider hull,stepped with a pad
would be able to stay in throttles as hull I have now
im maxing the speed it can handle
will keep contacting people as I hear
sad is found 2 laying at a shop not being used and wont sale
tks
as wouldn't answer simple ?s
ill be getting back with will as he wanted to get with me on some stuff
so we may work out something as I really like the 36 capsule look,,,,
and fit it to a 30 with 4 bucket seats
wanting to stay in a weight spot for what im doing
to keep my excelleration and speed I have now
and with longer/wider hull,stepped with a pad
would be able to stay in throttles as hull I have now
im maxing the speed it can handle
will keep contacting people as I hear
sad is found 2 laying at a shop not being used and wont sale
tks
#38
Registered
Thread Starter
history of the molds as I know is Excalibur in 1980 raised the top deck added longer bottom strake out rear and the 8" notch on transom and made it in 81-82
in 1982 welcraft got the 27 molds from Excalibur and made them late82-85
activator got the molds from welcraft or whoever had them after the last 1985 speedster was made from welcraft
used the same bottom and added a fairing to top mold with a raised center area on deck to bow
after a few yrs added a step plug in the bottom mold
made it till sold molds to manage overseas
manage has added a 2 step plug in the mold now to date still making that boat
in 1982 welcraft got the 27 molds from Excalibur and made them late82-85
activator got the molds from welcraft or whoever had them after the last 1985 speedster was made from welcraft
used the same bottom and added a fairing to top mold with a raised center area on deck to bow
after a few yrs added a step plug in the bottom mold
made it till sold molds to manage overseas
manage has added a 2 step plug in the mold now to date still making that boat
Last edited by johnmiffco; 07-02-2016 at 12:17 PM.
#39
Registered
iTrader: (1)
history of the molds as I know is Excalibur in 1980 raised the top deck added longer bottom strake out rear and the 8" notch on transom and made it in 81-82
in 1982 welcraft got the 27 molds from Excalibur and made them late82-85
activator got the molds from welcraft or whoever had them after the last 1985 speedster was made from welcraft
used the same bottom and added a fairing to top mold with a raised center area on deck to bow
after a few yrs added a step plug in the bottom mold
made it till sold molds to manage overseas
manage has added a 2 step plug in the mold now to date still making that boat
in 1982 welcraft got the 27 molds from Excalibur and made them late82-85
activator got the molds from welcraft or whoever had them after the last 1985 speedster was made from welcraft
used the same bottom and added a fairing to top mold with a raised center area on deck to bow
after a few yrs added a step plug in the bottom mold
made it till sold molds to manage overseas
manage has added a 2 step plug in the mold now to date still making that boat
Last edited by F1-00 Racing; 07-02-2016 at 12:32 PM.