Mounting Trim Pumps
 

How is everyone mounting their trim pumps to the bulkhead in engine compartment? Thanks.

With offshore slide mounts and stainless plates.

I may have the stainless plate if that helps.

http://www.cpperformance.com/c-763-m...-brackets.aspx

Yep, I use the slide mount thing.

Same.

I have some 1/8" stainless plate. What do you do? Mount plate to pump then that to the cpperformance slide mount?

You guys have any pics?

That is sweet but more then I want to spend for 3 pumps.

Anybody have any pictures of their trim pump rigging?

I bought some 6061 aluminum plate stock in 1/4" thickness and made my own mounting plates. Had roughly 30 bucks in aluminum and another 20 having the plates anodized black when done.

Bolt pump bodies to the plate and then through bolt the plate to the bulkhead.

I've been rebuilding boat for last 2yrs.from new fuel tank to rebuilt motor and transom....adding tabs which I never had and full hydraulic steering and did all the work myself with help from a couple friends and haven't posted a single pic. Just looking for ideas on mounting Trim Pumps on bulkhead and rigging lines. If my questions offend you...move on.

Click on the blue quote - it has pictures of trim pump rigging, I dont think c_deezy was trying to be sarcastic.

Now I apologize to c_deezy for being a d**k with my response and look forward to checking out the thread. Sorry c_deezy and thanks for pointing that out dcb.

Correct - Link goes to a specific post with pictures...I wasn't able to get into my photobucket last night.

[ATTACH=CONFIG]558960[/ATTACH]

Will these mounts work with these pumps?

http://www.offshoreonly.com/forums/g...ea-wanted.html

First post has pics of what my boat has

[ATTACH=CONFIG]558961[/ATTACH]

Here is another option, mounted to battery box.

[IMG]http://i1069.photobucket.com/albums/...2012210345.jpg[/IMG]
[IMG]http://i1069.photobucket.com/albums/...2012221550.jpg[/IMG]
[IMG]http://i1069.photobucket.com/albums/...w/P1010195.jpg[/IMG]

Now you need a Drive Reservoir Bottle to match.

Sweet set up but just want to work with what I have and add some sort of mounts to bulkhead.