Trade Steering Bracket/wing plate
#1
Charter Member #232
Charter Member
Thread Starter
Trade Steering Bracket/wing plate
I have a wing plate for the steering ram and the extension brackets that you need for when you use Stelling boxes to move #5 drives off the transom. I want to trade this stuff for a pair of TRS wing plates. Anyone interested?
Jon
Jon
__________________
Put your best foot forward!
Put your best foot forward!
Last edited by Audiofn; 10-01-2002 at 11:23 PM.
#2
Registered
Join Date: Oct 2000
Location: Greenwich CT. U S of A
Posts: 1,845
Likes: 0
Received 0 Likes
on
0 Posts
Jon
I think I have a pair of Imco wing plates from when I changed from trs to 3A's.
Their yours if I can find them. I'll check the pile of parts & debris that used to be a 3 car garage later today.
I think I have a pair of Imco wing plates from when I changed from trs to 3A's.
Their yours if I can find them. I'll check the pile of parts & debris that used to be a 3 car garage later today.
#3
Charter Member #232
Charter Member
Thread Starter
Cool DJD that would be awsome. If you want I can try and unload the #5 stuff and send ya the proceeds. What ever you want.
Jon
Jon
__________________
Put your best foot forward!
Put your best foot forward!
#5
Charter Member #232
Charter Member
Thread Starter
I purchased a used external steering set up and it came with these parts. They look to be good to go (I have only seen pictures so far) What is your email and I will send you some pictures.
Jon
Jon
__________________
Put your best foot forward!
Put your best foot forward!
#6
Charter Member #232
Charter Member
Thread Starter
Oh as far as how much... I am really looking to just replace with TRS stuff so if DJD finds his stuff then you pay shipping and it is yours. It will only sit and collect dust at my shop and my shop is shrinking so IT ALL MUST GO!!!
__________________
Put your best foot forward!
Put your best foot forward!
#7
Registered
Join Date: Oct 2000
Location: Greenwich CT. U S of A
Posts: 1,845
Likes: 0
Received 0 Likes
on
0 Posts
Jon
I have searched 80% of the "stock pile".
I have come up with the pins for the steering couplers that bolt to the wing plates that the hyd. steering rams slide onto & top off with a big nut, the bolts, brand new 90 degree stainless through hull cable fittings, stainless TRS tie bar yokes etc, etc, etc but no wing plates ...YET.
I got side tracked first by the baby, now, by a suspicious bottle of Merlot.
I'll finish the search tomorrow..............
I have searched 80% of the "stock pile".
I have come up with the pins for the steering couplers that bolt to the wing plates that the hyd. steering rams slide onto & top off with a big nut, the bolts, brand new 90 degree stainless through hull cable fittings, stainless TRS tie bar yokes etc, etc, etc but no wing plates ...YET.
I got side tracked first by the baby, now, by a suspicious bottle of Merlot.
I'll finish the search tomorrow..............
#8
Registered
Join Date: Oct 2000
Location: Greenwich CT. U S of A
Posts: 1,845
Likes: 0
Received 0 Likes
on
0 Posts
Oh, lets not forget the stock HP500 intake manifolds, Stainless Marine manifolds, HP500 water pumps, exhaust tips, Pistons, connecting rods, bravo one 23deg. props, BBC rear mount starters, hoses belts, boatloads of misc hardware and a wide variety of destroyed trs gears & shafts.
I'll find the wing plates sooner or later...................
I'll find the wing plates sooner or later...................
#9
Charter Member #232
Charter Member
Thread Starter
DJD give me a call tomarrow (978) 985-0639. Maybe we can help you out with some of that stuff
Jon
Jon
__________________
Put your best foot forward!
Put your best foot forward!
#10
Gold Member
Gold Member
Join Date: Nov 2000
Location: Fl
Posts: 91
Likes: 0
Received 0 Likes
on
0 Posts
Dave as usual you forgot about me!! I can usr the wing plates and extensions for the number 5s. I might have the plates if you dont find them or at least part of them. Let me know.