Anybody have a spare prop for a outboard ?
 

My father in-law spun his hub on a 1989 force 50 hp outboard.
the hub is going to cost him 50 dollars to replace. i was just wondering if anybody out there had one laying around and wants to sell it CHEAP. He doesn't have a lot of money so i'm helping him find one. The one he has is a 12.5 pitch but really anything will work with a higher pitch. new prop at my price from port supply is around 190.00. It has splines and a shear pin along with a plastic cone and cotter pin. Force that year i believe was made by chrysler so any ideas? Anybody have one laying around in somewhat good shape? he has a 22' pontoon boat and it's slow a a turtle
Thanks,
Rick

ya,I might

South Side outboard in Orlando has tons of used props, they should be able to help you ask for Jim Bob 407-658-2628

One question,
Will an Evinrude prop work on a force motor?

If so, I may have a prop that would work for you. It was off of a 60 horse Evinrude-Tracker outboard/Pontoon boat combo. It was just cleaned up at a prop shop, (Midwest Propeller, advertises in Powerboat mag), but we sold the boat is was used on.
E-mail me at [email protected] if interested.

Gordo, so what did you put back on the cowgirl boat for a prop?

We didn't put a prop back on it....ha! Just kidding! :D

Gordo bought a brand new prop for the cowgirl boat.

Rick,
Be a nice son-in-law and take his prop to the local prop shop and pick up the tab. After all he gave you his daughter didn't he:D

hey,found one in the barn.....give me an address and pay for the shipping and its yours

My address

Rick Borba
7801 summer harvest ave
Las vegas, NV, 89129
(702)493-5200
PLease let me know how much the shipping and I'll cut a check or money order for you. Thank you so much for looking(finding). If you ever need something out my way please drop me a line and i'll see what i can do. Thanks again

Rick

I didn't know. I figured since the new owners will probably never leave the dock with the boat they wouldn't need a prop - HA!