PG-13

iTrader: (1)

I have done two. One a Jaws 24 which rode on rails and picked up 4 mph, Second Carrera 8m that carved the water like a turkey dinner and ran 73 with twin 250 mercs with labbed 26 Bravos. So who has done it? How did you fill in low areas, did you sharpen the strakes. I know a few have done it, so I have read on OSO.

paul buckner

Think I have his name correct Bor on here did his 24 ft Pantera which he races in Europe stock 496ho 83 mph GPS

airjunky

iTrader: (2)

Picked up 2mph on a mid 80's twin bbc sleekcraft by squaring the transom to hull edge.
Made a diy reverse mold with some waxed plastic 1/2 angle and used some clearcote brand clear gel had laying around.
The older boats tend to have rounded edges at the radius on bottom to help pop em out of the molds i believe

BUP

iTrader: (9)

meaning sending it to a professional boat fiberglass shop who does bottom jobs or one self doing it ?

PG-13

iTrader: (1)

Yourself, ingenuity, self reliance. Or at the very least your own personal input into what needed filling and shaped. Your views on redesign, as an example: the BT boat with its speed at LOA

f_inscreenname

I've taken the hook out of a couple boats but never "blue printed" the whole bottom.

Interceptor

Blueprint, there is an outdated word.

Sydwayz

iTrader: (1)

Does this count?

BigSilverCat

That is defiantly the roughest sand paper I have see used on a boat.

Sydwayz

iTrader: (1)

It's like they don't even know how to wet sand.