Now you can call MYCO and get their aluminum craddle for the lift. It's like your boat sitting on the trailer bunks instead of the two bunks of the lift. I got one this year and it works great :)

Sean,
Here is what Cigarette said about them back in 1987. This comes out of the original stuff I got with the boat.

Cafe Racer Specs

It still sounds like a Hydro-hoist. I did not ask if this is a Level-lift, cable lift or the older A-model that comes up front first and has four long bolts (roughly 30" long) to retain the lift to the dock?? Your description is typical of all Hydro-hoists. There are other manufacturers ( one close to Mt. Home Arkansas) and Econo-lift com to mind, but those utilize square air chambers, not tubes. Hydro-hoist is the only manufacturers I know that use fiberglass tubes (usually BLUE). They may have a record of that lift if it was engineered by them. best of luck!!

Sean,
You may want to ask Ozzie. He has a similar setup.

Thanks again for the advice guys. If it doesn't fit, I guess I'll just sell it and buy on that does...

...I hear Ozman's on a trip...I'll check with him when he returns.