Hydro Hoist and Cafe Racer question...
10-09-2002, 09:28 PM
#11
Registered
Join Date: Oct 2000
Posts: 1,782
Likes: 0
Received 0 Likes
on
0 Posts
Now you can call MYCO and get their aluminum craddle for the lift. It's like your boat sitting on the trailer bunks instead of the two bunks of the lift. I got one this year and it works great 
10-09-2002, 09:39 PM
#12
Registered
Join Date: Dec 2000
Location: NW USA
Posts: 797
Likes: 0
Received 0 Likes
on
0 Posts
Sean,
Here is what Cigarette said about them back in 1987. This comes out of the original stuff I got with the boat.
Cafe Racer Specs
Here is what Cigarette said about them back in 1987. This comes out of the original stuff I got with the boat.
Cafe Racer Specs
10-10-2002, 08:28 AM
#13
Registered
It still sounds like a Hydro-hoist. I did not ask if this is a Level-lift, cable lift or the older A-model that comes up front first and has four long bolts (roughly 30" long) to retain the lift to the dock?? Your description is typical of all Hydro-hoists. There are other manufacturers ( one close to Mt. Home Arkansas) and Econo-lift com to mind, but those utilize square air chambers, not tubes. Hydro-hoist is the only manufacturers I know that use fiberglass tubes (usually BLUE). They may have a record of that lift if it was engineered by them. best of luck!!
10-10-2002, 03:01 PM
#15
Registered
Thread Starter
Thanks again for the advice guys. If it doesn't fit, I guess I'll just sell it and buy on that does...
...I hear Ozman's on a trip...I'll check with him when he returns.
...I hear Ozman's on a trip...I'll check with him when he returns.
