Not a Donzi but what is it?
#1
Registered
Thread Starter
Join Date: Apr 2017
Location: Buffalo, NY
Posts: 18
Likes: 0
Received 0 Likes
on
0 Posts
Not a Donzi but what is it?
I had posted in another area and didn't receive much traffic so I am trying a repost here.
I picked this hull up and for the life of me, I can't figure out the manufacturer. There are no markings anywhere on the underside of the deck/dash or the transom. It is a full 18' long. Unlike a Donzi, there is no tub in the cockpit area. Also the sheer line drops in the rear too much. Also above the rub rail the glass has a gentle curve. Has a mercruiser cut out for the outdrive and mercruiser shifter. A very heavy, solid hull. There are too many changes for it to be a splash of a Donzi. No ID plate so I assume it is pre 1972 and also has lifting strakes so that puts it in the mid to late 60's. Any help would be greatly appreciated.[IMG][/IMG][IMG][/IMG][IMG][/IMG][IMG][/IMG][IMG][/IMG][IMG][/IMG][IMG][/IMG][IMG][/IMG]
I picked this hull up and for the life of me, I can't figure out the manufacturer. There are no markings anywhere on the underside of the deck/dash or the transom. It is a full 18' long. Unlike a Donzi, there is no tub in the cockpit area. Also the sheer line drops in the rear too much. Also above the rub rail the glass has a gentle curve. Has a mercruiser cut out for the outdrive and mercruiser shifter. A very heavy, solid hull. There are too many changes for it to be a splash of a Donzi. No ID plate so I assume it is pre 1972 and also has lifting strakes so that puts it in the mid to late 60's. Any help would be greatly appreciated.[IMG][/IMG][IMG][/IMG][IMG][/IMG][IMG][/IMG][IMG][/IMG][IMG][/IMG][IMG][/IMG][IMG][/IMG]
#3
Registered
Scrap ????
#9
Registered
Old Four Winns U series?