Great work from a powdercoater and OSO member
11-30-2017, 02:53 PM
#21
Registered
iTrader: (-1)
Join Date: Jul 2006
Location: Boca Raton Fl.
Posts: 544
Likes: 0
Received 0 Likes
on
0 Posts
Tom
Thank you for the kind words and thank you for trusting us with your F-650, it's a really cool truck. Living in South Fla. and being a consumer I also constantly run into issues, Im dealing with contractors to have home repairs done after Irma and its such a struggle, they don't call back, show up or do things timely. I vowed 19 years ago when I started in business to never fall into the S. Fla stereotype, " do what you say and say what you'll do". So far the philosophy has served us well, we have grown from a small 2 person operation to one with 7 employees and equipment ranging from New Hurco CNC mills and Lathe, CNC Plasma cutting, CNC tube rolling and Bending, Punch presses and iron workers along with a state of the art powder coat plant. Again if we can be of any service to anyone here on OSO please feel free to reach out
Thank you for the kind words and thank you for trusting us with your F-650, it's a really cool truck. Living in South Fla. and being a consumer I also constantly run into issues, Im dealing with contractors to have home repairs done after Irma and its such a struggle, they don't call back, show up or do things timely. I vowed 19 years ago when I started in business to never fall into the S. Fla stereotype, " do what you say and say what you'll do". So far the philosophy has served us well, we have grown from a small 2 person operation to one with 7 employees and equipment ranging from New Hurco CNC mills and Lathe, CNC Plasma cutting, CNC tube rolling and Bending, Punch presses and iron workers along with a state of the art powder coat plant. Again if we can be of any service to anyone here on OSO please feel free to reach out
VIP Member
12-01-2017, 07:37 AM
#24
Registered
Here's the truck. May be for sale in the near future if anyone is interested... 
This is one of the bumper brackets. The bumper was slightly misaligned, Paul actually found it was off-center too, so he removed the whole thing, centered it, adjusted the gaps to the body, then fabbed up these brackets and gussets to reinforce it. Again, all he was asked to do was to adjust the angle of the bumper, so he went way above and beyond!
This is one of the bed mounts that wasn't even bad, but Paul went through and beefed up the welds on all of them
It would be better if I had "before" pictures, but I had no idea there was going to be such a huge difference before/after lol.
This is one of the bumper brackets. The bumper was slightly misaligned, Paul actually found it was off-center too, so he removed the whole thing, centered it, adjusted the gaps to the body, then fabbed up these brackets and gussets to reinforce it. Again, all he was asked to do was to adjust the angle of the bumper, so he went way above and beyond!
This is one of the bed mounts that wasn't even bad, but Paul went through and beefed up the welds on all of them
It would be better if I had "before" pictures, but I had no idea there was going to be such a huge difference before/after lol.
02-21-2018, 08:50 PM
#25
Registered
Join Date: Nov 2000
Location: Rock Hill S.C.
Posts: 73
Likes: 0
Received 0 Likes
on
0 Posts
I wanted to say Thank you to Paul for the work he and his shop did powder coating some boat parts for me. I live in South Carolina and based on the positive comments in this thread I decided to send my parts to him. I was extremely happy there work and the parts came out looking new with no blemishes. I told Paul i wanted I wanted it done right and never asked him about the cost. He delivered on quality and a good price. I would recommended Southeast coating and fabrication in Pompano Beach Florida for any powder coating needs you may have.
