.





After the milling of the putty, a guide coat is applied (purple dye) to create a sanding limit





https://farm5.staticflickr.com/4299/...7c00a968_b.jpg




https://farm5.staticflickr.com/4316/...bca131f4_b.jpg



https://farm5.staticflickr.com/4310/...a27b07a8_b.jpg

.

The mold is getting very close...and the deck mold has been milled as seen in the background



https://farm5.staticflickr.com/4329/...9b196bfa_b.jpg




https://farm5.staticflickr.com/4329/...eab5c8ff_h.jpg




https://farm5.staticflickr.com/4321/...26141ae7_b.jpg

.


The deck has been milled and coated. Getting ready for putty application then CNC machine again with finer and finer CNC (drill) bits
https://farm5.staticflickr.com/4322/...80614321_k.jpg




The hull will be sanded down to 2000 grit, then gel
https://farm5.staticflickr.com/4311/...07ae3174_k.jpg