Drive shower, which one fits?
 

Sorry to ask this but I'm fitting a drive shower and don't want to order the wrong one. Can't buy them here so I have to order from O.S. I know shipping costs nearly as much as the shower but I can live with that.

The cap type look fine, can someone confirm from my photos, it's an '07 Bravo one X with finned cap and bolts. I've found a couple of cap type showers that will fit an XR low profile finned cap. Is that the same as my "X" finned cap?

If there's an OSO advertiser reading who can be bothered shipping one to Thailand, please jump in.

Thanks in advance,
RR

PM sent. Thank you.

I have the simreks on my x drives with the Imco steering caps, slightly elongated the top hole in showers fit perfect, plus they don't require drilling into cavitation plate

Blownhammer, thanks for your response, good info.
I've purchased one through LS1 (Hardin Marine). He answered my post in about half an hour then I messed up learning to use paypal, ended up ordering twice but he still worked it all out straight away, cancelled one order and will ship the drive shower today. (Gave me a discount too :))

+1 for LS1 and Hardin Marine.

RR

Are there drive showers for the dry sump #6?

No, and they don't need drive showers

Who makes those anti ventilation plates on the bravos in the first photo? Are they the same size as the stock Bravo casting or bigger?

Had them on my boats also, good product.

Thanks I had seen the IMCO ones but they look to be the same size as the drive casting, I need to find some a little larger to stop my props from slipping so much

Sorry for the derail, I also have the simrek drive showers but only have a tie bar to contend with back there.