Pilini Marine is knocking them out
#41
Registered
Thread Starter
.
#42
Registered
Thread Starter
.
Jim is so elated after seeing his new Pilini Marine 34 cat practically completed. Still no word if Jim will wait for the 450R motors or hang with the 400Rs till the new motors become readily available. But one thing's for sure, Jim (a.k.a JerzeeJim) is counting the days till his cat is delivered up North where the boat will be rigged.
Congratulations Jim!
Jim is so elated after seeing his new Pilini Marine 34 cat practically completed. Still no word if Jim will wait for the 450R motors or hang with the 400Rs till the new motors become readily available. But one thing's for sure, Jim (a.k.a JerzeeJim) is counting the days till his cat is delivered up North where the boat will be rigged.
Congratulations Jim!
Last edited by noli; 05-10-2019 at 09:29 PM.
#43
Registered
Thread Starter
.
Partial Rigging from Jay Pilini has been completed
either Jim needs a new camera or he needs to stop shaking from the feeling of joy on his new cat!
Partial Rigging from Jay Pilini has been completed
either Jim needs a new camera or he needs to stop shaking from the feeling of joy on his new cat!
#44
Registered
Thread Starter
.
nice windshield
nice windshield
#45
Registered
Thread Starter
.
#46
Registered
Thread Starter
.
#47
Registered
Thread Starter
.
...don't be surprised if you see JerzeeJim and nastybug (who sports the first Skater 318) frolicking in the big waves with their cats on the jersey shore, these two very cool folks have gotten to know each other well in a short amount of time!
.
...don't be surprised if you see JerzeeJim and nastybug (who sports the first Skater 318) frolicking in the big waves with their cats on the jersey shore, these two very cool folks have gotten to know each other well in a short amount of time!
.
Last edited by noli; 05-10-2019 at 09:29 PM.
#49
Registered
Join Date: Mar 2012
Location: jersey shore berkeley township
Posts: 16
Likes: 0
Received 1 Like
on
1 Post
Yes those brackets are only 3 in. The boat has an 18 in notch so we went that size.Most of the other boats have no notch an 10 in setback.we think that will be the fastest an best handling.Rolf papke from proteck had alot of impact on that
#50
Registered
Thread Starter
.
The famous 24CC is back in the production
The famous 24CC is back in the production