Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   General Boating Discussion (https://www.offshoreonly.com/forums/general-boating-discussion-51/)
-   -   1970's Topaz - anyone know anything? (https://www.offshoreonly.com/forums/general-boating-discussion/352034-1970s-topaz-anyone-know-anything.html)

seafordguy 01-28-2018 08:48 PM

1970's Topaz - anyone know anything?
 
anyone know about these at all? Saw one that looks like a Donzi 18 type layout. Looked like a cool boat but I'd never heard of them.

Were they any good? Quality?

old bird 01-29-2018 09:49 AM

Topaz boats were built up the road in Owings Md, They were primarily sport fish with the smallest I;m aware of being the 24. I believe they were well built but I really don't know personally. How about a picture. I think they did start in 1970.

seafordguy 01-29-2018 10:06 AM

2 Attachment(s)
Here you go......

Not much information on them that I can find.

Attachment 574757

seafordguy 01-31-2018 08:17 AM

Bump - any more thoughts before I go look at this thing this weekend?

jax555 01-31-2018 08:20 AM

I had a yellow one
 
It was a topaz 18 or 19' very wide beam compared to a donzi It was A351 Windsor with A V-drive in it very good rough water boat

seafordguy 01-31-2018 09:58 AM


Originally Posted by jax555 (Post 4607800)
It was a topaz 18 or 19' very wide beam compared to a donzi It was A351 Windsor with A V-drive in it very good rough water boat

Thanks Jax - sent you a PM.

I might take a chance on this thing for 3k dollars - he says he has paperwork from recent engine rebuild and the boat looks pretty clean. Would be a cool ride for my kids this summer.

Sydwayz 01-31-2018 10:56 AM

351s and other Ford motor options were often mated to King Cobra outdrives. VERY hard to get service done on those. If it's an I/O with that setup, pass unless you want to rerig with an outboard.

seafordguy 01-31-2018 07:35 PM


Originally Posted by Sydwayz (Post 4607846)
351s and other Ford motor options were often mated to King Cobra outdrives. VERY hard to get service done on those. If it's an I/O with that setup, pass unless you want to rerig with an outboard.


thanks Brian - Chevy 350 with Alpha is in it now. That's simple and cheap

seafordguy 02-03-2018 04:26 PM

4 hour drive and when I got down there there the guy had left the water hose attached and there was an igloo frozen solid in the drive and outside. I mean a huge ice block. Couldn't run it, I had no idea what else was frozen so I turned around and came hold. Unreal.....


All the more agitating because I had asked him to please run it before I got down there to ensure nothing had broken in this cold we've had lately.

Oh well - a shame because boat was solid and would have cleaned up good..


All times are GMT -5. The time now is 02:03 AM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.