Got The Itch Again....
04-18-2019, 07:50 PM
#221
Gold Member
Gold Member
I've made a mental note several times when members post info that gives clues to their age. 
. Unfortunately, been of that age too, I've forgotten all those mental notes so instead, I just choose to believe I'm one of the younger guys. 
RR (delusional)
. Unfortunately, been of that age too, I've forgotten all those mental notes so instead, I just choose to believe I'm one of the younger guys. RR (delusional)
The following users liked this post:
bigboat28 (04-23-2019), larslindroth (10-29-2022), masi242 (04-22-2019), offshore312 (04-22-2019), payuppsucker (04-23-2019), rak rua (04-22-2019)
04-23-2019, 04:52 PM
#226
Registered
Thread Starter
Needed it as high as possible (w/running 25” motors) but didn’t want to get into the transom contours on the corners of the transom.
W/some fiddling, I got the propshafts right where I want them.
Hope to test float it next wk.
BTW, haven’t fogotten your manual for the 15 but it’s just the owners manual and won’t tell you much that you don’t already know.
W/some fiddling, I got the propshafts right where I want them.
Hope to test float it next wk.
BTW, haven’t fogotten your manual for the 15 but it’s just the owners manual and won’t tell you much that you don’t already know.
04-25-2019, 07:00 PM
#227
Registered
Thread Starter
Headway..............................
Heres some shots.
The bracket cleaned up and prepped for mock up.
Installed for mock up.
Glass work is not done yet but figured hanging a 1000lbs on it would be a good test of my design.
Ill gel it when done.
Next test is to fill the new fuel tank w/water and tow it to the local pond and see how it floats at rest w/all the changes and to determine where the weight goes.
Heres some shots.
The bracket cleaned up and prepped for mock up.
Installed for mock up.
Glass work is not done yet but figured hanging a 1000lbs on it would be a good test of my design.
Ill gel it when done.
Next test is to fill the new fuel tank w/water and tow it to the local pond and see how it floats at rest w/all the changes and to determine where the weight goes.
Last edited by Twin O/B Sonic; 04-25-2019 at 07:05 PM.
04-25-2019, 08:09 PM
#229
Gold Member
Gold Member
Looking very nice.
For the 'float' test, you'll have to leave it overnight in filthy water so you will get a nice brown line all round it. Then you'll know exactly how high up you have to go with the antifoul........!
For the 'float' test, you'll have to leave it overnight in filthy water so you will get a nice brown line all round it. Then you'll know exactly how high up you have to go with the antifoul........!
