|
Silent choice Y pipe leaking water
as rpm goes up, i hav a small leak from the pivot pin in the Y pipe, so water leaks inside the bilge and i tolerate no water in my bilge, like nothing. Are these leak fixable? Or i need to buy new y pipes? |
The rubber boots on mine have always covered those pins. Possible yours are too high? Those pins are near the top of the y pipe. The replacements don’t use the pins but have nubs that snap into those holes. |
Times 2. I also had a leak on a new boat I purchased last year. Flapper was removed per service buliten and the rubber boot was to high and not covering pin. |
https://cimg8.ibsrv.net/gimg/www.off...dec7d75539.jpg I dont have any rubber at least not on the swivel pin i have one on the actuator on each pipe, but none on the swivel pin should i? Not even written what brand it is... |
Call Corsa Marine, there are two o rings on the shaft that need replaced, most likely they will send them n/c |
For future reference, that is your diverter valve not y-pipe. |
Yep they leak there. See one to 5 every year leak. Sometimes after the heat builds up they stop leaking. Sometimes once again.
|
I have a Volvo Penta 8.1 OSi with silent choice and it is leaking from it which is filling my bilge with water.
see video of the leak here Photos.app.goo.gl/cPvvUKgq5hdNULgD9 any suggestions or help on what parts i need to replace or what i should do to stop the leak would be appreciated. |
Quote:
|
Video link
https://photos.google.com/share/AF1Q...dCWkh5eHYtY1BR Read post 5 and go buy a couple O rings |
| All times are GMT -5. The time now is 12:26 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.