Offshoreonly.com - External hydraulic steering cylinder size for Bravo

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- General Boating Discussion (https://www.offshoreonly.com/forums/general-boating-discussion-51/)

- - External hydraulic steering cylinder size for Bravo (https://www.offshoreonly.com/forums/general-boating-discussion/352650-external-hydraulic-steering-cylinder-size-bravo.html)

Plus Man

03-05-2018 11:19 AM

External hydraulic steering cylinder size for Bravo

Can anyone tell me the size of a hydraulic cylinder
Need length pin to pin
also cylinder shaft size
And stroke I assume 9 inch???
for a bravo 1 thx

phragle

03-05-2018 11:39 AM

There are a whole bunch of sizes. It depends on the kit, where the transom and drive mounting locations are etc....

Griff

03-06-2018 01:05 AM

They vary from one brand to another as well.

phragle

03-06-2018 06:00 AM

Imco has a really nice breakdown on their systems with cylinder lengths, mounting bracket locations etc,,,

Ed	03-06-2018 03:25 PM

Far and away, the most commonly used cylinder, no matter who makes it, is the nine inch, for sterndrive applications. Be it single, or twin drives.

tripps

03-11-2018 08:56 PM

Cylinders

When I needed help Imcos. Drive shop was very helpfull

Frey3581

03-12-2018 06:57 PM

I recently worked through a mixed bag of Zeiger steering with Latham drive caps.
Paul Everett at Everett Performance was very helpful and they manufacture the Zeiger steering....top of the line.

All times are GMT -5. The time now is 08:08 PM.