Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   General Boating Discussion (https://www.offshoreonly.com/forums/general-boating-discussion-51/)
-   -   My 525 builds (https://www.offshoreonly.com/forums/general-boating-discussion/353804-my-525-builds.html)

rvtransport 05-14-2018 01:32 PM


Originally Posted by JRider (Post 4626183)
Isnt that a wee bit lean?

We actually did send ecm's back to add little more fuel to the curve. I have AFR gauges in boat so will monitor.

35 zr donzi 05-14-2018 08:41 PM

My 525 EFI's have 350 easy hours on them ,when do you think i should do the heads ?

Griff 05-15-2018 01:08 AM


Originally Posted by 35 zr donzi (Post 4626516)
My 525 EFI's have 350 easy hours on them ,when do you think i should do the heads ?

Probably should have done them 50 hrs ago.

rvtransport 05-15-2018 09:10 AM


Originally Posted by 35 zr donzi (Post 4626516)
My 525 EFI's have 350 easy hours on them ,when do you think i should do the heads ?

The problem with running them with hours and week valve springs is the valves float little and beat the crap out of valve train. I would at least change valve springs every 200ish hours IMO.

endeavour32 06-18-2019 05:38 PM

RV-

What did you end up getting for a speed increase, with the mods you did to your 525 EFIs?

rvtransport 06-19-2019 07:52 AM

5mph gain. Best is 90mph now. Will run 85 to 87 loaded every day. Before was 78 to 80 loaded and 85 perfect conditions. Have almost 40
hours on engines now and run really nice.

IGetWet 06-19-2019 08:17 AM

These dogs can hunt, I can vouch for that! One of the funnest rides I’ve been on.

cmoore7 06-19-2019 01:47 PM

What are you running for drives? Those holding up too?

rvtransport 06-19-2019 01:55 PM

XR's. No issues yet. Figure Mercury puts them on 600sci motors and I am similar in power. I am careful getting on plane but let them rip when rolling regularly. :)

VoodooRob 06-19-2019 02:31 PM


Originally Posted by rvtransport (Post 4692777)
XR's. No issues yet. Figure Mercury puts them on 600sci motors and I am similar in power. I am careful getting on plane but let them rip when rolling regularly. :)

Mercury played a sick joke with this pairing. I will say with the factory tune my 600SCIs fell on their face below 3,000 rpm, found out it was programmed in to keep the drives alive. Our previous stock 525/XR boat pulled harder getting on plane.


All times are GMT -5. The time now is 09:29 AM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.