Sneak Peeks: Donzi 41 GT No. 2 And 44 Catamaran No. 1
Coming to Miami in 2019, two cool—and too cool—reveals from Donzi, https://speedonthewater.com/new-boat...catamaran-no-1.
|
The new 41 looks much better then the first and the cat deck is very nice. So Fountain somehow crushed some boat molds and Donzi contracts out for a new catamaran mold sorta implies Iconic is funding Donzi to build new and Fountain puts some lipstick on existing stuff.
|
Both boats look great, can’t wait to see that cat all rigged. Isn’t the predicted 80mph with 3 400’s on the low side? Hustler broke 100mph with the same motors on the shotgun. |
That outside contractor doesn't happen to be someone with initials JC does it?
|
Originally Posted by apex svt
(Post 4661462)
Both boats look great, can’t wait to see that cat all rigged. Isn’t the predicted 80mph with 3 400’s on the low side? Hustler broke 100mph with the same motors on the shotgun.
Originally Posted by Wildman_grafix
(Post 4661473)
That outside contractor doesn't happen to be someone with initials JC does it?
When the boys received the mold they were more than disappointed to see that it lacked both the ZRC's pad bottom and the notched transom. So they warned management, "With the bottom you are giving us this thing is going to be a turd!" Management responded by saying, "Speed isn't everything" and to go ahead and build it - so they did. At least the boys convinced them that calling it a ZRC would soil a great name - and it was changed to GT. |
Originally Posted by Interceptor
(Post 4661457)
The new 41 looks much better then the first and the cat deck is very nice. So Fountain somehow crushed some boat molds and Donzi contracts out for a new catamaran mold sorta implies Iconic is funding Donzi to build new and Fountain puts some lipstick on existing stuff.
|
Who designed the cat bottom ? Will it be a typical 5 or 6 seater ? Bold move in my opinion . Best of luck to them in it |
Originally Posted by Marginmn
(Post 4661489)
So the boys at the factory were all excited to hear that they were going to get the opportunity to build a new ZRC with triple outboards. Naturally they wanted to do the mold in-house but were overruled by the bosses and JC was contracted to make the mold.
When the boys received the mold they were more than disappointed to see that it lacked both the ZRC's pad bottom and the notched transom. So they warned management, "With the bottom you are giving us this thing is going to be a turd!" Management responded by saying, "Speed isn't everything" and to go ahead and build it - so they did. At least the boys convinced them that calling it a ZRC would soil a great name - and it was changed to GT. |
JC?
Originally Posted by Wildman_grafix
(Post 4661473)
That outside contractor doesn't happen to be someone with initials JC does it?
|
I have never seen a deck wrap around and be half the hull side like that cat deck. I guess it does not matter where they join if your not doing a rub rail?
|
All times are GMT -5. The time now is 05:52 AM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.