Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   General Boating Discussion (https://www.offshoreonly.com/forums/general-boating-discussion-51/)
-   -   Places that do chrome (https://www.offshoreonly.com/forums/general-boating-discussion/358696-places-do-chrome.html)

ICDEDPPL 01-22-2019 10:30 PM

Places that do chrome
 
I have a few things that I would like to re-chrome . I`m getting quotes from $50-150 per piece!

Anyone have a place that`s reasonable or is this the norm now?


https://cimg5.ibsrv.net/gimg/www.off...73971c7adc.jpg

https://cimg6.ibsrv.net/gimg/www.off...451c7c03ad.jpg

f_inscreenname 01-22-2019 10:40 PM

Al's polishing shop in Ohio. I live in Maryland and have been using them for years.

redsled33 01-23-2019 06:00 AM

Unfortunately this is the norm now. Advanced playing in Nashville is the best around you will pay for it but it will be perfect. We have used them in several car builds

phragle 01-23-2019 06:04 AM

Thats not bad these day... All the plating stuff has been hot so hard by regulations/epa stuff the rices have gpne thru the roof

VoodooRob 01-23-2019 06:34 AM

Thats the average price for a good process. Copper, Nickel, & Chrome 5 layer total will get a brilliant finish. Cheaper can be done but will flake much sooner like the cleats in your pic.

cigrocket 01-23-2019 06:54 AM

Going rates, I had a few pieces chromed almost 9 years ago, and that was the price then.... good luck

Wally 01-23-2019 11:14 AM

That's actually cheap from what i've found around my house in Chicago/Ohare!

glassdave 01-23-2019 06:39 PM


Originally Posted by f_inscreenname (Post 4669316)
Al's polishing shop in Ohio. I live in Maryland and have been using them for years.

Al's is pretty good they are just a few miles from me and those prices are certainly within line, 100-150 each range. Theres actually a lot of finish work in older worn pieces. I have literally had hundreds possibly thousands of pieces chromed and the best i have used was Fini Finish up in Detroit but i dont believe they are still around.

Speedracer29 01-23-2019 06:50 PM

Website is still up and they were still plating a couple years ago when I had some saddlebag latches done. I’ll look next time I get north of 8 Mile.

http://finifinish.com/

abones 01-23-2019 08:42 PM

Dan, those prices actually seem pretty good, I have a lot of chrome work done each year with the classic cars we restore and I can tell you from what I see that's not bad!
As said a few posts back the EPA has killed the plating industry, and forced the remaining venders to raise pricing to stay compliant..


All times are GMT -5. The time now is 05:41 AM.


Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.