|
Originally Posted by seafordguy
(Post 4694692)
Yes. It's had two successive rounds of SL power. 615 cube NA Merlin blocks. Ordering my closed cooling packages tomorrow to protect those aluminum heads. Hardin Marine stainless sea water pumps are on the way. Can't wait to get it in the water. Got to get the right props on it next year. 26's probably aren't right, and is at least like some lab work done.... |
Originally Posted by offshoredrillin
(Post 4694745)
Dont be so quick to lab them, the straight hulls run very well on stock props, also check into the 4 blades from Brett, im getting ready to test them on mine.
|
Originally Posted by seafordguy
(Post 4694692)
Yes. It's had two successive rounds of SL power. 615 cube NA Merlin blocks. Ordering my closed cooling packages tomorrow to protect those aluminum heads. Hardin Marine stainless sea water pumps are on the way. Can't wait to get it in the water. Got to get the right props on it next year. 26's probably aren't right, and is at least like some lab work done.... Where are you getting the closed cooling systems that can support 615" engines? I would like to put a closed cooling system on my 572" in the Talon, but I haven't found a system that states it will cool that large of an engine Thanks, Deanhttps://cimg2.ibsrv.net/gimg/www.off...e6bcc0c85b.jpg |
Dean, Eric told me he was getting his system from CP.
Here's a link for a 700-900 HP kit from Mr. Cool https://www.mrcool.us/mrm-5322-off-e...00-900-hp.html |
Congrats Eric! Awesome boat!
|
1 Attachment(s)
Originally Posted by payuppsucker
(Post 4694790)
Dean, Eric told me he was getting his system from CP.
Here's a link for a 700-900 HP kit from Mr. Cool Attachment 576401 I talked to the CP/Hardin Marine guys today and they are going to build me a custom exchanger to fit my blocks since they are tall decks. I spent the night in the bilge trying to figure out how to relocate the PS pump since it used the head holes to mount. I think I have a plan. Wish there was a simple relocate kit or crank driven PS pump. Said they can make the exchangers in 2 weeks so I'll keep you posted Dean |
Originally Posted by TomZ
(Post 4694809)
Congrats Eric! Awesome boat!
|
Originally Posted by seafordguy
(Post 4694841)
Thanks Tom. Hope you're well |
Nice looking ride. You’ve got some serious power too!! Congrats |
Originally Posted by seafordguy
(Post 4694839)
Dean, I talked to the CP/Hardin Marine guys today and they are going to build me a custom exchanger to fit my blocks since they are tall decks. I spent the night in the bilge trying to figure out how to relocate the PS pump since it used the head holes to mount. I think I have a plan. Wish there was a simple relocate kit or crank driven PS pump. Said they can make the exchangers in 2 weeks so I'll keep you posted Dean Sounds really cool, (no pun intended), can't wait to see it. Happy 4th of July! Thanks, Dean |
| All times are GMT -5. The time now is 03:39 AM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.