Surface Drive...
#1
Registered
Thread Starter
Join Date: Mar 2002
Location: US Virgin Islands
Posts: 322
Likes: 0
Received 0 Likes
on
0 Posts
Surface Drive...
Anyone use this type of drive. I have a Cafe and am considering dumping the damm Bravo's and going with the Pulse Drive. Any info on any type of surface pericing drive system would help (Arenson, Trimax, etc.).
Mongo
Mongo
#2
Guest
Posts: n/a
There is or was a 46t Scarab on
Tortola BVI thats got twin Arnesions with drop boxs.
I Rerigged it fo the owner of
Pussers but he sold a few months ago.
Im think its still in the Virgin Islands.
Check it out try to get a ride.
Surface drives feel a little
different so I would get a ride
in one, There great in your area for getting into some shallow water and protecting the Coral.
Mike J
Tortola BVI thats got twin Arnesions with drop boxs.
I Rerigged it fo the owner of
Pussers but he sold a few months ago.
Im think its still in the Virgin Islands.
Check it out try to get a ride.
Surface drives feel a little
different so I would get a ride
in one, There great in your area for getting into some shallow water and protecting the Coral.
Mike J
#3
Platinum Member
Platinum Member
Drove a 30 Sutphen Ocean Pacer with Kaama drives. What a rush! It was a quick boat that rode really well in 4+ swells. Surface drives will definitely help your top end. Be careful to consult a pro about the swap. It will change your trim leverage.
#4
Registered
Thread Starter
Join Date: Mar 2002
Location: US Virgin Islands
Posts: 322
Likes: 0
Received 0 Likes
on
0 Posts
Hi Guys,
Catamando, check you PM.
Mike, so Charles got and sold a bigger boat... I remember his Cig with the diesels and arenson's. Can you get enough bow lift from the surface drives? I am personally looking at the Pulse drive. Similar to Arneson, but trims the whole shaft(s) and steers with rudders. I'll see if Charles knows the wearabout of his boat (I have shared a few "painkillers" with him over the years).
Christian, explain "trim leverage". Thanks!
Mongo
Catamando, check you PM.
Mike, so Charles got and sold a bigger boat... I remember his Cig with the diesels and arenson's. Can you get enough bow lift from the surface drives? I am personally looking at the Pulse drive. Similar to Arneson, but trims the whole shaft(s) and steers with rudders. I'll see if Charles knows the wearabout of his boat (I have shared a few "painkillers" with him over the years).
Christian, explain "trim leverage". Thanks!
Mongo
Thread
Thread Starter
Forum
Replies
Last Post
thayes11
General Q & A
0
10-02-2005 12:36 PM