Friend needs help with ASD
#1
Registered
Thread Starter
Friend needs help with ASD
I have a friend that needs info on an Arneson drive, but I don't know enough about them to know what he has. The only markings on it are "Arneson Patent Pending", "Borg Warner" and the number on a plate on the side "M&L 19438".
It is fully articulable. It has a transmission. I would estimate it's age at 15 years plus.
Can anyone tell me anything about from this small amount of info? If you can't, who can?
It is fully articulable. It has a transmission. I would estimate it's age at 15 years plus.
Can anyone tell me anything about from this small amount of info? If you can't, who can?
#2
have you tried the source ? www.arneson-industries.com I'm sure a call to them could shed some light
#5
Kaama,
I........D A M N sure wouldn't say that Arneson was some "SILLY MANUFACTURER" Have you lost your F@^&ING MIND? Do you KNOW who Howard Arneson IS? Do you KNOW what he's done for offshore performance boating? For making 100' plus YACHTS go over 80 mph? DAMN BOY do the research before you call someone " a silly manufacturer"
Robert
I........D A M N sure wouldn't say that Arneson was some "SILLY MANUFACTURER" Have you lost your F@^&ING MIND? Do you KNOW who Howard Arneson IS? Do you KNOW what he's done for offshore performance boating? For making 100' plus YACHTS go over 80 mph? DAMN BOY do the research before you call someone " a silly manufacturer"
Robert
Last edited by Tonto; 11-05-2002 at 02:32 AM.
#6
Registered
Thread Starter
That was a joke. Yes, I know Arneson drives are the next best thing to sex*, but the factory was probably closed last night at 9:00 pm.
______
* Depending on the engine option. 900hp+ could be better than sex.
______
* Depending on the engine option. 900hp+ could be better than sex.
#10
1975 X-18 Donzi, Arneson
Platinum Member
Join Date: Oct 2000
Location: CT
Posts: 151
Likes: 0
Received 0 Likes
on
0 Posts
That's a ASD 6, They also made a drop box unit ASD 6.
Rik can get part's if needed. The gearing is in the trannie, the drive is direct, 1:1. The drive should be able to handle 600hp or more.
Do you have the steering and trim rams??
Rik can get part's if needed. The gearing is in the trannie, the drive is direct, 1:1. The drive should be able to handle 600hp or more.
Do you have the steering and trim rams??