525 Engine Plate
 

I'd like to replace this plate (right of the pic) on top of at least one of my 525s, but don't know where I would get it, or if I'd just need to refurbish this one instead. This pic is from the center motor, which gets stepped on more often than the others.

Guessing this is a problem many others have encountered too, and thought someone might have advice.

Thanks for your help.


https://cimg7.ibsrv.net/gimg/www.off...cdccc9900b.jpg

You might consider having a local graphics shop make a few custom for you. They can duplicate original or customize it to your liking. If it regularly takes abuse like that, consider having it “laminated” with a thick clear layer like XPEL which is what clear bras on cars are made of.

Ran across THESE... Stainless steel and even lighted if you want.. :)

https://ebay.us/NpHA0B

I had a local guy redo mine, these are much harder to do than the 525 ones, he even did the tiny lettering , before and after pics

https://cimg3.ibsrv.net/gimg/www.off...0067c653fb.jpg
https://cimg0.ibsrv.net/gimg/www.off...9f4a19a154.jpg