|
Who makes switch panels ?
I know about Innovate.
I`m looking to get a new panel made with switches installed and wired if possible.. need some more options. https://cimg4.ibsrv.net/gimg/www.off...39f0eab91d.jpg |
New wire marine.
|
I used Steve at Innotech. Not sure about the wiring.
|
Contact Zero Patience, he's done several!
|
If it's any consolation - all pushbutton switches are experiencing long lead times as the Coronavirus (as crazy as that may sound, it's true) is affecting imports of goods from China. We're dealing with each customer's panel project as it comes through production, but there's a realistic possibility it may be weeks or many weeks before we're able to procure pushbuttons on a regular basis. If you're OK with waiting for pushbutton switches then we can get your design started and get you into production ASAP to hold your spot in line. This corona BS is getting just stupid . |
Originally Posted by ICDEDPPL
(Post 4728847)
This corona BS is getting just stupid .
Yup.... |
Get some carbon fiber sheet and start cutting!
I like the look of the stainless in the center of the switch but I think the push buttons with the wording or picture on it would be more beneficial at night. Then there wouldn’t have to be any printing on the panels itself either. https://www.cpperformance.com/c-176-...-switches.aspx Hearing all this corona virus this and that just makes me thirsty. |
Originally Posted by SHORTFUSE
(Post 4728721)
I used Steve at Innotech. Not sure about the wiring.
|
Im in line foe the switches too :bsflag:
|
Bocatech switches if you want to spend a lot
I went through Billet Automotive Buttons...they are out of Australia...really cool dude easy to deal with...I'd go through them and just make your own panels since they are nice and flat...just my opinion..good luck |
Originally Posted by BBYSTWY
(Post 4728904)
Bocatech switches if you want to spend a lot
I went through Billet Automotive Buttons...they are out of Australia...really cool dude easy to deal with...I'd go through them and just make your own panels since they are nice and flat...just my opinion..good luck |
I am in the process of new switches and going with these, happy with them as far as I am in the project but yes hard to get at the moment... blue sea is another option i found also but have no experience with them
https://www.bluewatergadgets.com/tri...hread-on-22mm/ https://www.bluesea.com/products/cat...utton_Switches |
Originally Posted by Unlimited jd
(Post 4728714)
New wire marine.
|
Originally Posted by IGetWet
(Post 4728858)
Get some carbon fiber sheet and start cutting!
I like the look of the stainless in the center of the switch but I think the push buttons with the wording or picture on it would be more beneficial at night. Then there wouldn’t have to be any printing on the panels itself either. https://www.cpperformance.com/c-176-...-switches.aspx Hearing all this corona virus this and that just makes me thirsty. Those are nice ! None in stock :( |
Originally Posted by BBYSTWY
(Post 4728904)
Bocatech switches if you want to spend a lot
I went through Billet Automotive Buttons...they are out of Australia...really cool dude easy to deal with...I'd go through them and just make your own panels since they are nice and flat...just my opinion..good luck |
I went with the Nordic dragon head in the middle of all the switches and what they are(blower, bilge, etc) on the outer rim...was very shocked at how clearly everything is etched on them...don't have a pic handy but can text you one later if you want to see them
|
Post a pic when you can. I want to see
|
Had the woman snap a couple pics of them for me....
https://cimg6.ibsrv.net/gimg/www.off...9bd3b7d7b.jpeg https://cimg9.ibsrv.net/gimg/www.off...72adcc5e9.jpeg |
What amperage are those rated at? I’ve found a bunch only rated at 3-5 amps
|
I wanna say 5 or 10...on the fuel switches and hatch switches I ran relays on them to make up for that...all my lights and everything are LED's so they don't draw hardly anything anyway...I specifically asked him about my underwater lights as they draw the most and he wasn't concerned at all and assured me they would be just fine.
|
I ordered all my switches from there .. customized each one .
I think it`ll come out really nice. $300 out the door for 11 22mm switches thanx for the tip |
No prob bud...post some pics when you get em! As long as the corona crap doesn't bone you they should ship quick...I think I had mine in a week after I ordered them
|
Originally Posted by ICDEDPPL
(Post 4729716)
I ordered all my switches from there .. customized each one .
I think it`ll come out really nice. $300 out the door for 11 22mm switches thanx for the tip |
Originally Posted by F-2 Speedy
(Post 4729757)
I'm surprised you didn't get them from Phil........:cool-smiley-027:
I probably should have so I can have genuine Cig stuff. |
Is the etching on the button itself backlit?
|
If you get black ones yes...the stainless ones no its just the ring lit up
|
Originally Posted by ICDEDPPL
(Post 4729776)
$5,000 and $700 in shipping .
I probably should have so I can have genuine Cig stuff. |
Originally Posted by Wildman_grafix
(Post 4729796)
Was it really that much? No way.
|
Got the switches BBWTTYW recommended .. here`s some of my favorites
https://cimg2.ibsrv.net/gimg/www.off...c06a287742.jpg https://cimg4.ibsrv.net/gimg/www.off...babecbb1d9.jpg https://cimg6.ibsrv.net/gimg/www.off...306d42facf.jpg https://cimg7.ibsrv.net/gimg/www.off...2559831a91.jpg https://cimg2.ibsrv.net/gimg/www.off...c200914dde.jpg https://cimg4.ibsrv.net/gimg/www.off...b781fd166e.jpg https://cimg7.ibsrv.net/gimg/www.off...a22ed9dfc5.jpg |
|
those are awesome
|
Hahahaha hell yea man those are badass!!
|
Got mine in finally and other than some cleaning got the dash done
https://cimg8.ibsrv.net/gimg/www.off...cf141612ce.jpg https://cimg1.ibsrv.net/gimg/www.off...360c7355b4.jpg |
Nice tip re billetbuttons. Going to redo mine this winter and these are way cheaper than newwire, which are all on backorder anyways.
Can anyone chime in what they did for the 3 way switches operating the bilge pumps and nav/mast lights? |
Looking for someone in the tampa area that can do this and install.
|
Originally Posted by blown
(Post 4846061)
Nice tip re billetbuttons. Going to redo mine this winter and these are way cheaper than newwire, which are all on backorder anyways.
Can anyone chime in what they did for the 3 way switches operating the bilge pumps and nav/mast lights? https://cimg4.ibsrv.net/gimg/www.off...aa800b05c3.jpg |
I'm currently flush mounting my digital dash
https://cimg7.ibsrv.net/gimg/www.off...7cb303864c.jpg es. |
I went with standard switches for 3 ways. Could be accomplished with 2 switches too.
https://cimg8.ibsrv.net/gimg/www.off...6f8313686f.jpg |
Originally Posted by ICDEDPPL
(Post 4846142)
I went with standard switches for 3 ways. Could be accomplished with 2 switches too.
|
| All times are GMT -5. The time now is 03:42 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.