Looking for a part # or source for bbc water inlets
 

LOOKING FOR A PART # OR SOURCE FOR BBC WATER INLETS , looking to replace 2 everything i find online at CP & Teague are crossovers .I believe they are 1" water line from water pump Teague says if i cant find any they can machine a set
https://cimg3.ibsrv.net/gimg/www.off...3c7415a871.jpg

looks like something used on v-drives or jet boat engines. if you go down the page on this link yours look like the ones for bravo transom plates but the others shown are for the engines so not sure where yours came from.
https://www.hardin-marine.com/c-126-...er-inlets.aspx

I think these were original KE , but none left anywhere to speak of so far ....

Front side pic
https://cimg7.ibsrv.net/gimg/www.off...f68e5df30c.jpg

I have two water inlets with one inch hose nipples that are made out of stainless. I will post a picture later . There at the shop.

that be great
https://cimg1.ibsrv.net/gimg/www.off...ad70e9f2d0.jpg
https://cimg4.ibsrv.net/gimg/www.off...a0916f6c0d.jpg

Here is what I have.
https://cimg6.ibsrv.net/gimg/www.off...61d8769c5.jpeg
https://cimg8.ibsrv.net/gimg/www.off...edb8ec754.jpeg

How tall are they i only have 2 " to be able to fit under race plate

Here are some pictures with some measurements, you could cut them shorter .
https://cimg1.ibsrv.net/gimg/www.off...51d7597db.jpeg
https://cimg3.ibsrv.net/gimg/www.off...0d709644b.jpeg
https://cimg4.ibsrv.net/gimg/www.off...f78ae6a44.jpeg
https://cimg7.ibsrv.net/gimg/www.off...e854c86b6.jpeg