|
Originally Posted by J-Bonz
(Post 4792508)
Thanks guys for taking the time to reply, that definitely gives me some ideas. I wasn’t planning to run at night bout thought it would be cool when getting back on the trailer at night, backing in the driveway at night, or doing a quick wash down at night. Yes, a lot of effort for little reward but, thought it would finish my little scout rig out nicely.
Jr |
https://cimg9.ibsrv.net/gimg/www.off...1da133c73.jpeg
I'm doing these on mine as uplighting for night and it just looks cool shining up on a white hull. |
https://cimg2.ibsrv.net/gimg/www.off...3699441d49.jpg
I got pulled over at 0430 one morning driving the 650 to work. PoPo said the blue shining Forward was illegal. No ticket, didn't even ask for my ID. I turned off for 5 miles then turned back on. Fuk M I have never had an issue towing w the trailer lights on. BUT that doesn't mean it legal or not :daz: The lights on the trailer change color w a remote. |
Originally Posted by ICDEDPPL
(Post 4792488)
I just use the 16' strips off ebay or what not . I also get 1/4" wide double sided 3M tape since some of the chinese glue on them sucks balls
Never been pulled over. https://cimg8.ibsrv.net/gimg/www.off...b7b706b444.jpg What winch are you using? |
I did the under hull runway lights using simple led 2 diode clearance bulbs, have 10 on each side, hooked into my lights but did add a disconnect just in case I got hassled, but never have
|
Originally Posted by Tractionless
(Post 4794257)
What winch are you using?
|
Did the truck up with some lights too.
https://cimg6.ibsrv.net/gimg/www.off...86f8fa806.jpeg https://cimg7.ibsrv.net/gimg/www.off...edbb185010.jpg |
Are any of your lights wired into the turn signals? I'd like to have some amber strips come on with the running lights (on all the time) but also blink for the turn signal, but can't seem to figure out an easy way to make that work..
|
Originally Posted by LakeHuronPower
(Post 4794624)
Are any of your lights wired into the turn signals? I'd like to have some amber strips come on with the running lights (on all the time) but also blink for the turn signal, but can't seem to figure out an easy way to make that work..
|
Buying options seam to be endless… Good god, could spend hours for a 20’ bright white segment? Any luck by others finding lengths greater than the norm 16’? Different note, thanks Dan for the input. Hope u get those motors back together…
|
| All times are GMT -5. The time now is 12:01 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.