Offshoreonly.com
Page 3 of 3
1
2
3
Show 40 post(s) from this thread on one page

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   General Boating Discussion (https://www.offshoreonly.com/forums/general-boating-discussion-51/)
-   -   Paint vs Powder (https://www.offshoreonly.com/forums/general-boating-discussion/377713-paint-vs-powder.html)

caseyh 11-18-2022 12:06 PM
back when my motors where being built we almost anodized the alum heads.

DrFeelgood 11-18-2022 12:16 PM
Originally Posted by hblair (Post 4851783)
Ouch that is insane! I'm assuming your motor is toast? That's the dangers of letting the new guy paint the parts that "don't matter" (I own a body shop and could see that unfolding)
Surprisingly, no. The pickup was about 90% blocked but the motor never lost oil pressure, was 50-60 psi at all times. Melling high volume pump.


All times are GMT -5. The time now is 08:07 AM.
Page 3 of 3
1
2
3
Show 40 post(s) from this thread on one page


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.