Warrens twin clip on 28 Skater goes 135!
His 450r’s turned 15 1/2 x 39’s (!!!) 6400!
Skip to the 10 min mark. Ive know Warren for 20+ yrs and he knows how to make an OB fast. He has a 19’ STV tunnel boat that has been 131! https://m.youtube.com/watch?v=yIz7DC_7Ucs |
Great looking Skater, and Hell yeah, that’s fast! RR |
Originally Posted by rak rua
(Post 4861034)
Fix the link.
Great looking Skater, and Hell yeah, that’s fast! RR For some reason Im unable to successfully post links anymore. |
Red Rocket
Warren Duke is a great guy and committed boater.
|
I start to pucker at 100-105 or so in our Skater 28. 135 is hauling the mail! He has a widened hull. I wonder how much that is worth as far as stability and extra MPH. Of course Warrens years of experience must play a HUGE roll. It bothers me when I see newbies attempting these high speeds. Great job and great looking boat!
|
Wider tunnel helps with lift.
Another 2x150 hp on the transom helps, too. The good thing is that he can move those engines to a bigger Skater. I have hit 110 mph in mine with 300XS and Mercury 3-blades. Earlier owner hit 118mph with 300X and Mercury 3-blades. Hoping to close some of that gap with DeWald 4-blades this season. Warren is in a different class. |
He says in the video that the hull is Kevlar and approx 2200 lbs less power.
And yeah, Warren has been going fast for decades.
Originally Posted by 36Tango
(Post 4861085)
I start to pucker at 100-105 or so in our Skater 28. 135 is hauling the mail! He has a widened hull. I wonder how much that is worth as far as stability and extra MPH. Of course Warrens years of experience must play a HUGE roll. It bothers me when I see newbies attempting these high speeds. Great job and great looking boat!
|
2200 lbs and Kevlar
I think that is what it says in the 28 Skater sales brochure that came with my boat.
|
That's HAULING in that thing.
We rigged one with triple 2.5OS that ran mid 120s and it was flighty. I can't imagine another 10mph.Congrats! |
Not sure where you guys are getting that this standard-deck 28 is widened? It is surely the width that it was pulled from the mold (there's only one 28 mold), with a 45" wide tunnel. You can tell by the fact that the deck/cockpit width are all standard, with the same three-across rear seat in all standard-deck 28s. The only widened 28 pleasure boat Pete ever built was for his buddy Roy Schrader, who sadly passed in 2021. That 12" widened flat-deck 28 is now owned by Mike LaPaglia and has a set of 450Rs on it, spending most of its time on Lake Havasu.
|
All times are GMT -5. The time now is 09:44 AM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.