Ever installed or ran Cobra Power Motors
#1
Registered
Thread Starter
Join Date: Oct 2000
Location: medford, nj usa
Posts: 2,185
Likes: 0
Received 0 Likes
on
0 Posts
Ever installed or ran Cobra Power Motors
I would love to get some feedback from all of you who have ran, installed Cobra motors. I am considering going with either Cobra 675(540 cubic inch) or 725 (572 cubic inch)motors in place of my 500efi for my 37 Active Thunder. I was looking for some feedback on reilability, engine idle, durability etc... Thanks for the input.
[ 01-12-2002: Message edited by: thunderdan ]
[ 01-12-2002: Message edited by: thunderdan ]
#6
Platinum Member
Platinum Member
I say tell us all, dont sugarcoat anything, the hell with being discreet
#8
Platinum Member
Platinum Member
GOFSTCAT, have you used Cobra motors in your rigging or is this hear say. Have you ever worked for COBRA.
#9
Platinum Member
Platinum Member
Yea, that makes sense, two guys that sell parts, or rigging, give me something concrete instead of bull****