Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   General Boating Discussion (https://www.offshoreonly.com/forums/general-boating-discussion-51/)
-   -   Converting 10 pin to 14 pin (https://www.offshoreonly.com/forums/general-boating-discussion/381088-converting-10-pin-14-pin.html)

Mtb_05 11-19-2023 02:10 PM
Converting 10 pin to 14 pin
 
Trying to get info on converting 10pin harness to 14pin harness. Looking to upgrade to Merc 525’s that have the 14pin harness. My boat side has the 10pin harness. Do I just need the AGI boxes to convert the digital signal to analogue so my gauges work? Or is there more it than just installing AGI boxes? TIA

bencini231 11-23-2023 03:28 PM
Originally Posted by Mtb_05 (Post 4885355)
Trying to get info on converting 10pin harness to 14pin harness. Looking to upgrade to Merc 525’s that have the 14pin harness. My boat side has the 10pin harness. Do I just need the AGI boxes to convert the digital signal to analogue so my gauges work? Or is there more it than just installing AGI boxes? TIA
There are 14 pin to 10 pin harness adapters available and yes the AGI boxes will convert the signal. Here is a link to the adapter.

https://www.greatlakesskipper.com/me...-10-pin-14-pin

JRider 11-27-2023 01:20 PM
You can get away with installing sending units for the gauges that do not work. We did this on early 2000s power play, it was a lot cheaper than AGI boxes


All times are GMT -5. The time now is 12:19 AM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.