crazy inline 10 2 stroke
 

The guy could auction it off, the thing is own shelf on the wall in the man cave worthy.
friends call B.S. and then start it.

Started the video and couldn’t turn it off!

The exhaust was killer!

When you have mad talent and too much time on your hands 🤓

A little eccentric but very cool.

I’m impressed. :)

I couldn't turn it off either, everytime it looked like fake it ended up on the lathe getting assembled timed or synched up and just kept watchimg, then the 5 magnets 2 cylinders fire at a time and yep that exhaust is some jewelry.

It's like this guy and that mr. Ho ! I'm like hey i build sh!t outside and in flip flops, why's my stuff never that nice ?

My only ***** was, the tach was off.

It May have turned 3k but not the 7 shown on the tach.

But, what is the proper setting for an I-10?

My only ***** was, the tach was off.

It May have turned 3k but not the 7 shown on the tach.

But, what is the proper setting for an I-10?

Thought it was going to be something "simple" at start.
Like just coupling them all together end to end lining cranks up.
Figured only synching was going to be throttle linkage(s).
That was LOTS more complicated than I was in store for.


Exhaust tone and rate was surprising.
Going to be one he!! of a weed whacker

if those are typical weed-wacker engines then each one is right around 1.5hp X 10 = 15hp Would make a mean all around go-kart :D :evilb:

Or maybe stick that into one of those 84" Apache RC boat hulls! now we are talkin! :D

Bonzi 84" single instead of twin screw. 15hp instead of 6.5hp. I like it.