Auto Meter Ultra Lite Tachs
#2
Guest
Posts: n/a
They don't have anything less than 9,000 in the Pro-Comp
Ultra-Lite guage (and the 9,000 versions have shift lights on
them).
I don't know what diameter you want, but they do offer a
Sport-Comp silver faced tach that can be mounted in-dash that
is 8,000rpm BUT it is only for a 3 3/4" hole and not 5".
If you are looking for 5", under 9,000rpm in silver, you are correct.
They do not make anything.
Ultra-Lite guage (and the 9,000 versions have shift lights on
them).
I don't know what diameter you want, but they do offer a
Sport-Comp silver faced tach that can be mounted in-dash that
is 8,000rpm BUT it is only for a 3 3/4" hole and not 5".
If you are looking for 5", under 9,000rpm in silver, you are correct.
They do not make anything.
#3
Registered
Thread Starter
thanks guys...I email tres at martin and was wondering if anyone else had any luck...
do you think 10,000 rpm tachs will work? My motors should be turning 5400-5500...i'm wondering if will look ridiculous with 10k tachs...
do you think 10,000 rpm tachs will work? My motors should be turning 5400-5500...i'm wondering if will look ridiculous with 10k tachs...