Offshoreonly.com - Mechanical Roller Camshaft

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- General Boating Discussion (https://www.offshoreonly.com/forums/general-boating-discussion-51/)

- - Mechanical Roller Camshaft (https://www.offshoreonly.com/forums/general-boating-discussion/39366-mechanical-roller-camshaft.html)

Mechanical Roller Camshaft

I have a practically new Cam Motion mechanical roller camshaft for sale. It is a "low-lash" roller (.010") with hardened drive gear allowing the use of a steel distributer gear. Here are the specs:

.639 Intake Lift
.622 Exhaust Lift

241 Degrees of Intake Duration
258 Degrees of Exhaust Duration

114 Degree Lobe Center

Designed and ground for a 502/509 Cubic Inch Engine. This cam performed GREAT! I am going to larger cubic inch and no longer need. $325 new, asking $275. Less than 25 hours on this cam. Please e-mail me at [email protected] with questions.

Mechanical Roler Camshaft

I forgot to metion it is also listed on eBay...