New 496 Whipple SC
#3
Registered
Thread Starter
Join Date: Oct 2000
Location: Fresno, CA, 93722, USA
Posts: 1,436
Likes: 0
Received 4 Likes
on
4 Posts
It's 1" lower than stock so no clearance is needed for height. Power on the HO is 620-640 @ 5200 and the Mag is 600-620 @ 5000. Both run 5-6lbs. of boost.
Thanks,
Dustin
Thanks,
Dustin
#4
Registered
What about front clearance? I also saw where you have changed pipes on your lower systems and are they avalable now?
#5
Registered
Thread Starter
Join Date: Oct 2000
Location: Fresno, CA, 93722, USA
Posts: 1,436
Likes: 0
Received 4 Likes
on
4 Posts
Yeah, we have the the NA cals done and are ready as well, the 525 package is still in development though. Were not ready to sale the exhaust yet as a package, but can do the cal if you put the headers on, standard E top CMI's is what the cal is for. You have to remote mount the oil filter and a bracket has to be made for the power steering, the shift bracket has to be moved and the ECU bracket needs to be supported, so it's somewhat of a pain. CMI is making us a set that has all the provisions needed, and the kit will come with a remote mount oil filter system. This is for the headers only, SC package will not need it unless you change headers which is still under testing as well.
Thanks,
Dustin
Thanks,
Dustin
#9
Registered
Thread Starter
Join Date: Oct 2000
Location: Fresno, CA, 93722, USA
Posts: 1,436
Likes: 0
Received 4 Likes
on
4 Posts
Most of the other goodies are ready to go as well.
Retail price is $6695. This includes the manifold, intercooler, pump, regulator, fittings, belt system, thermostat, ecu recal, 8 65lb injectors, hoses, etc.
Thanks,
Dustin
Retail price is $6695. This includes the manifold, intercooler, pump, regulator, fittings, belt system, thermostat, ecu recal, 8 65lb injectors, hoses, etc.
Thanks,
Dustin