Fuel Level gauges and ohms...
#1
Registered
Thread Starter
Fuel Level gauges and ohms...
Does anyone know which gauge I will need? I dunno what my 87 Cafe Racer senders are...
0 to 90 ohms, electrical, fuel level gauge
240 to 33 ohms, electric, fuel level gauge
16 to 158 ohms, electrical, fuel level gauge
Any thoughts?? Help greatly appreciated!
0 to 90 ohms, electrical, fuel level gauge
240 to 33 ohms, electric, fuel level gauge
16 to 158 ohms, electrical, fuel level gauge
Any thoughts?? Help greatly appreciated!
#3
Registered
Join Date: Nov 2001
Location: Palm Harbor, FL
Posts: 3,959
Likes: 0
Received 0 Likes
on
0 Posts
Sean, Some times the ohms will be printed on the top of the sending unit, other than that, get your meter out. If not get the part number, manufacture and call them. Wardey
#4
Registered
Thread Starter
yeah, i happen to have one of them thar ohm meters in my toolbox...
When you say measure the sweep, doesn't the sender have to come out anyway?
BTW, thanks for the response, I'm no electrician by any stretch!
When you say measure the sweep, doesn't the sender have to come out anyway?
BTW, thanks for the response, I'm no electrician by any stretch!
#6
Registered
Thread Starter
and the answer is...
240 to 33 ohms, electric, fuel level gauge...
http://www.rexmar.com/page501.html
Thanks again, Fred
240 to 33 ohms, electric, fuel level gauge...
http://www.rexmar.com/page501.html
Thanks again, Fred