Pulse drive installation
VIP Member
01-04-2003, 09:11 PM
#3
Registered
Thread Starter
Join Date: Mar 2002
Location: US Virgin Islands
Posts: 322
Likes: 0
Received 0 Likes
on
0 Posts
Hi Ron,
I'm a little over propped, but I am getting the same top end as before at less RPM. I am getting 62 at 4600 where I was getting 62 at 5200. Bravo 1 W/24 pitch B1 labbed.
Figure I will get close to 70 when I get the props right.
Mongo
I'm a little over propped, but I am getting the same top end as before at less RPM. I am getting 62 at 4600 where I was getting 62 at 5200. Bravo 1 W/24 pitch B1 labbed.
Figure I will get close to 70 when I get the props right.
Mongo
