B Max vs Imco extreme sc ?
#21
B-MAX REPAIR
Platinum Member
a little over a month a go B-MAX started shipping their own lower's. they are available in standard length OR 2" shorter. you can choose either when purchasing a drive.or you can purchase them separately, case only or complete lower with your choice of gear ratio. B-max does not use IMCO cases. in the past customers supplied lower cases when needed, not any more. RON BENDER
#24
Not true, B max, or an affiliate, did in fact order tons of lowers from IMCO w/ no vertical shaft, as the vertical shaft won't work on the B max. Also, IMCO lowers are all one piece aluminum, and are available in 1, 2 or 3" shorter. The Bmax is a very strong drive, but it is a gorilla that takes tons of HP to spin, one could just as easily put a speedmaster for the price. The IMCO is the best all around choice.
Steve
Steve
#25
Platinum Member
Platinum Member
Thanks for your help Steve, talk to ya when I get back.
#26
Registered
Mark,
What kind of power are you running?.
We have shipped close to 300 SC's last year, and have had very few problems. One thing you may want to consider is "Service". If you need to have it serviced, any Mercury repair shop can work on SC's, no need to send back to the manufacturer, which means very little down time.
IMCO
What kind of power are you running?.
We have shipped close to 300 SC's last year, and have had very few problems. One thing you may want to consider is "Service". If you need to have it serviced, any Mercury repair shop can work on SC's, no need to send back to the manufacturer, which means very little down time.
IMCO
#28
Registered
Join Date: Oct 2002
Location: Morgan Hill, CA
Posts: 50
Likes: 0
Received 0 Likes
on
0 Posts
Wildthing TAZ, do you know what the cost is for a new B-Max lower with a nose cone. I have a two year old B-Max drive now. I had a nose cone installed on it and they didn't do a very good job.
Thread
Thread Starter
Forum
Replies
Last Post
soinc
Drives and Lower Units
44
05-27-2009 09:20 AM
Sick Stinger
General Boating Discussion
22
03-23-2008 04:03 PM