2-Piece Valve Covers
#1
Registered
Thread Starter
Join Date: Sep 2001
Location: Nashville, TN
Posts: 567
Likes: 0
Received 0 Likes
on
0 Posts
2-Piece Valve Covers
I'm in the process of replacing the valve springs on my HP500 carbs as well as checking the top ends just to be sure. After removing the stock exhaust manifolds, etc. just to get the valve covers off I started thinking about some valve covers I saw somewhere that don't require removal of the exhaust manifolds first. I think they were two piece.
Anyone know who makes them and have any experience with them? Good, bad, no difference?
Thanks, Jeff
Anyone know who makes them and have any experience with them? Good, bad, no difference?
Thanks, Jeff
#4
Guest
Posts: n/a
www.keith-eickert.com they make a two pc. valve cover . powder coated . built to last . and a breeze to install and remove. 1-386-446-0660
#5
Registered
Join Date: Mar 2001
Location: st. clair shores mi ,us
Posts: 1,620
Likes: 0
Received 0 Likes
on
0 Posts
The Eickerts look really nice , but I purchased mine from CP performance, I believe they used to be made by B&M they are real tall and clear my Jesel rockers arms.
#6
2-pc. valve covers
If your looking for 2-pr. of black powdercoated 2-pc. B&M covers, complete with all the hardware, breathers, bolts etc. I have them.
$250/set+shipping. They are in perfect condition, i.e. NO salt usage ever.
Call 763-473-8963 eves/weekends. Gary.
$250/set+shipping. They are in perfect condition, i.e. NO salt usage ever.
Call 763-473-8963 eves/weekends. Gary.
#9
Registered
Thread Starter
Join Date: Sep 2001
Location: Nashville, TN
Posts: 567
Likes: 0
Received 0 Likes
on
0 Posts
EWB - If my memory serves me (and it rarely does), Todd has the Profile cat, right? Did he ever get comfortable with its handling? Did he change the motor at all? I'll let you know about trying the Eickerts - Thanks for the offer!
RPMRam - Got your message and sent a reply. I'll let you know.
I guess I'm having a hard time justifying $500 - $800 for valve covers since with the hours I run I doubt I'll be pulling them for the next couple years.
Thanks all!
Jeff
RPMRam - Got your message and sent a reply. I'll let you know.
I guess I'm having a hard time justifying $500 - $800 for valve covers since with the hours I run I doubt I'll be pulling them for the next couple years.
Thanks all!
Jeff
Thread
Thread Starter
Forum
Replies
Last Post
jonesmarineinc
General Boating Discussion
5
11-07-2002 10:20 AM