Offshoreonly.com - Offshore Mounts

Page 2 of 2

Show 40 post(s) from this thread on one page

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- General Boating Discussion (https://www.offshoreonly.com/forums/general-boating-discussion-51/)

- - Offshore Mounts (https://www.offshoreonly.com/forums/general-boating-discussion/41558-offshore-mounts.html)

CRUBOSS

01-21-2003 02:35 PM

I SENT YOU A REPLY but i forgot to include my e mail it is

[email protected]

Cord	01-21-2003 02:38 PM

Because this was a totally new installation, I used the alignment tool. I'm using an extension box, so alignment wasn't an issue. I can say though that there is quite a bit of adjustment with the feet.

ASD-6

01-22-2003 07:30 AM

1 Attachment(s)

Here's Gil's solution on a spare bare block I use for trial installation.

CRUBOSS

01-22-2003 07:42 AM

THAT LOOKS HEAVY , the plastic blocks are much easier to work with.

All times are GMT -5. The time now is 06:45 PM.

Page 2 of 2

Show 40 post(s) from this thread on one page